I’m that guy, the one that wants to be sure it works 100% of the time.
What can I do to increase the reliability of my 99.99% reliable Stag Arms 2T AR? I’ve replaced BCG with NiB m16 bolt and charging handle with BCM medium. I use GI steel mags with upgraded followers.
Thinking of upgrading extractor spring with BCM upgrade kit. Any other thoughts, other than seek help?
It’s always a good idea to have spare parts on hand but I would just shoot it as is until something breaks. If you want a useful up-grade for something that isn’t broke, get a better trigger.
What BCG did you get? It just being NiB may not be an upgrade depending on who made it and if it is in spec. For example, swapping a BCM phosphate BCG for a spikes NiB BCG would not be an upgrade.
Norman had the best idea with the trigger, get a Geissele SSA. Another upgrade would be to swap the carbine RE for a Vltor A5.
The BCM extra power extractor springs is a GREAT reliability enhancement. Not only do they aid in extraction but they also last much longer since they are made of chrome silicon. Remember to keep your BCG generously lubricated too (even if you use nickel boron you should still use generous lubrication). I personally like Slip2000 EWL products and TW25B.
Most all of the Stags I have seen did not have H buffers, had larger than normal gas ports .067-.070, had questionable carrier key stakings and no castle nut/endplate stakings as I recall.
It’s not a bad idea to replace certain parts to make things more reliable. But learning how to clear malfunctions is critical, that way you can keep your gun going 100% of the time.
And have spare parts on hand in the event you need to replace something.