Is there a training round of training device that will make a popping sound so that during dry fire training a timer will pick up the sound and record the time?
Right now the only way i know how to measure times is with a par time, but that’s not very accurate.
R.
Thats a good question. Im interested in knowing
The only devices I found that could have potential for this would be this laser set. The cartridge, which shoots the laser and the target.
Right now the device only shows you where the laser hit, but someone could redesign it to act just like a timer. Instead of recording by sound it could record when the target gets bit by the laser.
This would be pretty handy tool to have. You’re not only getting your times, but you’re also getting round impact information.
Here’s the site. http://www.laserlyte.com/new_products/New_LT-9_LT-40_LT-45.html
I was gonna mention the laser, but since it is not an audible sound like you asked, I kept quiet.
There are some timers out of Asia designed for Airsoft. They are said to be more sensitive than the typical shot timer. I have no experience with them, though.
If I recall, they weren’t that expensive. I could be wrong, though.
I hesitated on posting this because I can’t duplicate at home what I do at the range, and I certainly don’t want to be responsible for you buying this, then it won’t work as I advertised.
As I mentioned in that other thread, I use a CED 7000, and it will register hammer strikes on Colt 6920s and 6721s.
That 7000 is a couple years old.
I’m no expert with the thing, and a friend does all the set up; I just push buttons.
The 7000 I have here at home was bought at the same time, but is almost NIB.
I could only get it to register hammer strikes while holding the 7000 no farther than about 10" from the magwell.
The other one we use at the range will register hammer strikes (as I said before) when worn around the neck, on the wrist, or held near the buttstock/shoulder intersection.
It’s possible my technique was AFU as it’s difficult to manipulate the 7000 and the gun in certain configurations, or maybe there’s a setting I failed to set-up correctly.
Maybe you can find one to borrow, and give it a try prior to purchase.
Edit:
Something I just thought of.
I was doing this at home with an empty chamber.
At the range, I use dummy rounds - homemade and/or store bought.
Not sure if a round being in the chamber makes it louder.
Interesting. I have the CED 7000 so I’ll have to try that with my M4, 1911 and M&P. I’ll let you know what results I get.
Thknas
this may be a cheap and unusable idea but…
why not use a microphone and audacity? just tape the mic near the bolt and see what you get?
What you’d have to is record a beep or buzzer sound, set to play a few seconds after starting playback. Then on another track record through the mic. You’ll obviously have to manually calculate times, but it would work and be accurate.
That being said I’m sure not everyone will be able to navigate a program like Audacity.
I have an app for my ipod that detects the sound of my M&P dry firing. I use it alot.
threeheadeddog,
I think you are the MAN!!!
I have that app on my iphone but never really used it becuase i have the CED7000. So I just tested it after adjusting the sesitivity and and it seems to work perfectly with my M&P and my 1911.
This is perfect for my dry firing.
Again, you da man!!!
I have a CED 7000 that I use when actually shooting. I only use the app for dry firing so I dont actually know if the app will work when shooting lol. Also you have to be real careful on what you are looking at since at that sensitivity you pick up EVERYTHING in reguards to weapon manipulation. It took me a while to get the sensitivity right and I have to change it between guns.
On a side note it is quite sad just how much the I paid for the CED considering the price of the app.
yeah you’re right about that.
I did notice the sensitivity is REALLY sensitive, but I’m glad this works for dry firing though. I’ll just have to write down the different setting for my 1911 and M4.
Again thanks. I’m sure a lot of people will benefit from this info.
R.
let me ask you something.
What’s the focus setting for? and the echo rejection?
R.
You may have another app than I do. The one I have has an icon with a bullet going from the bottom right to the upper left with IPSC in the box and is called Shot Timer Pro. I cannot find an echo or focus setting in it.
I am also a complete moron when it comes to electronics such as this. I am the only adult I know that doesnt even own a cell-phone.
Ok you have the pro, mine is called just shot timer. At the center it has big red arrow going in a circle. No worries, i used it last night and it works great. It is super sensitive though, sometimes it even pickup the draw from the kydex holster.
Either way this will do nicely. Again thanks.
Surefire also makes an free iPhone app that will do this.
I have the fix for you. Not only will your shot timer work but you can guage your first shot accuracy.
The are reusable for several hundred shots. All you need is a primed case. I use my fingers and apply a small amount of Remoil to the bullet. Makes it easier to seat and reduces wear. You will want to run a patch through the barrel after 10 rounds. Set up an IPSC/USPSA target in the garage and have at it.
No, it will not cycle your slide…
Cool! I also have the Surefire shot timer app but never thought to try it with dry fire. I will crank up the sensitivity and try it tonight!
MPJMP,
It works well, but with the sensitivity all they up, I found it to be TOO sensitive. In a quiet room my Iphone picked up the pistol coming out of my Raven holster. I found that a 97% sensitivity works ok if you want it to pick up the trigger click.
R.