Drop-Leg Mag Pouch for Duty Belt

I tried the search function and manually, so if this has been covered, please direct me to a thread.

I am looking for a drop-leg mag pouch for AR mags for my duty belt.

I need it to be attached via a clip that I can leave on my belt, but easily remove the pouch and thigh attachements except when I foresee the need for the mags and have time to set it up.

My duty rig cannot be changed so it has to fit a Safariland 2.5 inch belt.

Ideally I’d like the pouches to be open top and be able to hold at least two, preferably three.

I’ve searched Eagle and Blackhawk’s product lines but don’t see what I’m looking for but it is also possible that I’ve missed it there.

Anyone have any suggestions about such a product?

Michael Brown

I’m not sure how close this is to what your looking for.

http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=24974&title=AR-15/M16%20TRIPLE%20HIP%20POUCH

I would like at using something like the Eagle Patrol Bandolier rather than some kind of thigh rig.

Check out www.tacticaltailor.com leg platforms. They have a keeper that you can keep on your duty belt and attach a platform with a 1.5 or 2" fastex buckle.

Hey MB I made something like this a few years ago. I took a Tactical Tailor mini modular panel and put two esstac shingles on it. Then I modded the TT panel by cutting off the top leg strap and then removing the belt hanger and sewed a metal d-ring on the top of it. Then when I need it all I have to do is clip it to my key ring on my belt and buckle one leg strap and I’m good to go. I ran it at the Oil Capital rifle match a few months ago too.

This.

+1 on the TT Drop Leg Platform!

I’m using the HSGI http://www.optactical.com/drlegmaca.html

I don’t see why you can’t install a QD attachment, but I have not done this.

The HSGI modular platform has a non QD hanger, but the HSGI holster platform has one with a QD buckle. They can be swapped - I did it when I had both and was experimenting with a leg rig. I would imagine HSGI could accomodate if one ordered direct from them and requested it. If not, ditching the QD seems to be a popular mod for the holsters and I bet somebody would trade.

I’ve also got a spare belt hanger (just the female half that attaches to the belt) stashed away if all else failed and you needed to make the other half yourself (which would only require the addition of the male half of a fastex buckle to the factory hanger, IIRC).

Check out SoTEch. They used to at least, have something just like your looking for, designed for one of the local PD’s(LAPD?).

It used a key ring/keeper mounted to the belt, and snap hook on the leg pouch, with a leg strap.

SoTech is good stuff, if you can get it.

Bob

I have the Eagle 4 mag clipable drop leg pouch. It’s somewhat heavy, and would have to be attached to a duty belt due to the weight. But it’s a quick way to add a lot of ammo to yourself.

this is weird timing. i was fumbling with some blade tech AR mag pouches yesterday and affixing them to an Eagle duty belt.

there’s a little snap on the back that swings out when you remove the phillips head screw. they clip on the belt. i’m not sure they’re bulletproof secure without the screw (if the belt is too wide) but seems to be working okay for now.

With the addition of a simple male / female fastex you could use a Safariland. You buy the 6004 shroud and up to 3 open top kydex pouches. Works well, retention for running / rolling; open top so no security.

Good luck

Ah, the old sub-load dilemma. . .

Let me start out with the obligatory advice-
A chest mounted magazine system will be more comfortable and allow the carriage of more magazines as well as other necessary “loud” kit. Sub-loads are a somewhat specialized and finicky affair. I have and still do utilize them to some extent, but all else being equal, a chest rig will be more versatile and comfortable than a sub-load.

However, if you have weighed the options and your employment requirements and have tried both ways and have decided that a sub-load is the best way to go, here is my recommendation:

Stay light and tight. For me that means no more than 2 rifle mags or 1 rifle mag and 2 pistol mags, keeping the system as close to the belt-line as possible while permitting rapid access. This will prevent the load from shifting on your leg and negatively interfacing with your genitals or anus, or at least away from your expected position when you go mobile at a rapid pace, and the low weight will also keep your belt from sagging excessively.

I have used a bunch of different methods, all tested in operations to come to my most recent setup.
HSGI Mini Modular Subload

Triad Tactical Flop-Top (2X)

  • I have used Eagle FB but find them a bit thick on the thigh, am about to try out the ATS Short Single M4 Mag pouch to see how they compare.

FWIW- I am in the process of moving everything to my armor and belt in an effort to reach the most efficient layout.

All photos are from the website of the respective manufacturer, not hotlinked.

I hope these are not the injected molded version. They don’t take daily use and abuse very well. I broke both of mine. I think “injected molded” is another way to say breakable plastic.

oh well, at least i didn’t spend a ton of $$$ on 'em.

i’ll look forward to destroying them in the next class.

This is a custom rig that S.O. Tech did for me several years ago. It is two of their Kydex lined pouches on their leg plate. I wear a female buckle on my inner belt and clip it on as necessary.

It has been through a bunch of rifle classes and rides in my cruiser. It has been 100% since I received it. It has optional retention flaps but I’ve never used them.

Specter has some, too:

http://www.spectergear.com/tacthighrigsmenu.htm

Try emailing Mike at Talontactical.com

He can custom make a lot of kydex stuff.