I have been doing some searching and some reading. I have come to the conclusion that I need to make certain modifications and upgrades to my DPMS AR 15, 16" bbl m4 style rifle with the goal of maximizing reliability. I thought by adding an m16 bcg by BCM that would go a long way. I am also thinking that while the barrel has a chrome chamber, the 1:9 twist barrel is only chrome moly, not chrome plated. As I have read here, you guys swear by the chrome plated 1:7 twist barrels. While I am comfortable with the 1:9 twist (I don’t want to get into that debate I am good with it) I know that the chrome plating is a big deal. Also, I was not able to determine the necessity of changing to an H buffer. No one really knows if that is necessary to increase weight if you increase the weight of the bcg by way of adding an m16 carrier.
So, to make this less confusing, the question is: What is recommended to make my DPMS “battle worthy” in the eyes of you very skilled and information-filled m4carbine members? Would you recommend just going with a chrome lined barrel? Adding an h buffer to my current rig? Going with a complete upper from bcm? Or, are my upgrades sufficient (BCM bolt carrier group, bcm large notch charging handle)? Is adding the h buffer a “no brainer” or is this a trial and error type of upgrade? I would like to know what I have left to do while I have a bit of cash now. MANY THANKS!!!
No kidding. Way less hassle than trying to swap out the barrel on your current upper, at not much more cost, especially since you can use your existing BCM BCG.
Then at least you can rest easy knowing you have good stuff.
I would just sell it because it will cost you quite a bit of money to make the changes that you discussed.
You can figure at least $200 for a barrel and another $130-$140 for a good bcg, and $20 for an H buffer. All of these upgrades are now costing at least $350.
I think you should be able to sell your DPMS for at least $550 to $600easily if not more. With that money you are within $200 of a Spikes Tactical M4LE or a S&W MP15 which are both very solid rifles. Furthermore, you are also within $300 to $400 of a BCM or Daniel Defense XV which are both great rifles.
But if that’s not an option, at least you got the BCM BCG. Check to see if the barrel is properly reamed for 5.56 (and if not, get it reamed). Get a H or H2 buffer. Lube rifle well, and shoot the hell out of it to be proficient with your rifle. If parts start failing, take note of what parts and make it a learning experience.
In my opinion your best option would be to sell the DPMS upper complete. That will offset your cost of getting a BCM upper. I believe that BCM has 16" upper receiver groups for 385.00.
I sold a slightly used Armalite complete upper with buttstock, rifle buffer and spring for 425.00 on Backpage about 3 months ago.
You could sell your dpms upper and get a 16 middy upper from bcm.
The Gunfighter CH is good but can come later. I would put money on atleast a milspec RE and an H or H2 buffer first, if not an A5 kit.
Selling the upper might be best option, money wise, but if you find someone who is willing to purchase the whole thing, do it. The fixes are not worth it and you’re better off getting a new upper or new rifle.
OK, guys. This is why I come to you guys not arfcom. NO OFFENSE TO ANYONE, but I have just seen a different type of professional here. I am very impressed indeed and have a high value for the opinions here regarding the AR15 platform.
So, I went ahead and ordered the complete BCM 16" m4 upper w/ 1:7 twist barrel. I already had the BCM m16 bcg on order and it will be here soon. I will just sell the DPMS upper after receiving it.
Now, with a BCM complete upper w/ 16" 1:7 twist barrel AND DPMS lower, have I accomplished my goal? Am I good to go with a DPMS lower? My pocket book is really hoping so, but this time I am doing everything right once. All input is appreciated.
Some may recommend upgrading the LPK for reasons they’ve experienced themselves as a search here on M4C will turn up. But as Iraqgunz stated above: “So as long as it is in spec and everything works you’ll be fine.”
Walter, you have made an excellent choice and will have many happy rounds downrange. Just make sure as IG stated that the lower is in spec and the parts are of good quality. If you feel your LPK is lacking, Grant at G&R has a hand picked LPK made from varied quality manuf. for sale.
I took down a DPMS lower I bought during the “Preban scare” and found the ext. tube was a milspec version. I bought the rifle complete so no one messed with it but me. I bought a commercial t6 stock and when I pulled the old off I noticed it. Check your ext. you may also have a mil spec tube.
No, guys I have a commercial buffer tube. I already have the VLTOR EMOD on it which is how I found out. Don’t tell me running a commercial tube is gonna be an issue. I can’t see how, but go ahead and let me know the deal. Thanks.
No, not a duty rifle per se. I would like it to be “duty worthy” if you will. It is supposed to be a serious rifle ready for home defense, hunts, extreme versatility, training with pushing it to the limits, plinking, ect. I also am a survivalist of sorts (self proclaimed) so equipment is always something to think about. I want something anyone here would say “man I’d bet my life on that rifle if I needed to.” I just didn’t feel comfortable with a “bubba gun” to tell you the truth. It was bothering me. Thanks.