Differences between Rifle, Midlength, and Carbines.

Ok I’ve heard about the pressure differences and such in regards to rifles, middy’s and carbines. However I am a noob to AR’s and have yet to see any info laid out as to how to tell the difference between the three types.

Now what are the actual specific difference between the 3 in regards to barrel length, length of gas systems and dimensional differences of the buffers and buffer tubes.

I am looking for info on the dimensional differences between em all and or links to info explaining the differences in a dimensional sense, not necessarily the performance differences between em. I guess I’m looking for an identification guide.

Easiest way is to make an approximate measurement from the front of the upper receiver to the rear of front sight post/gas block.

Carbine length gas system is ~7"

Midlength gas system is ~9"

Extended Midlength is ~10"
(Only found on Noveske 18" barrels that I’m aware of)

And Rifle length gas systems are ~12"

What he said

Also,

Generaly the shorter the gas system the higher the presure.

they call it “intermediate”- and it’s 11"

Thanks, thats exactly what I was looking for yet never saw listed, I just found the buffer faq that explains that aspect pretty well.:cool:

You’re right on “intermediate”, but it’s actually around 10.5"…

:smiley:

this leads to another question I have. the rear enc of the Gas block on my S&W is positioned at 7.5 inches from the reciever on a 16 inch barrel, now why not use a midlength gas system on a barrel that would allow you to do so?

As I assume 7.5 inches would make it a carbine length gas system unless the measurement is from the reciever to the gas port itself, either way the longest distance the port could reside at is 8 inches which i suppose would make it a hybrid of a middy/carbine length system,

or is the measurement based off the length of the gas tube. Honestly I’d prefer actual specifications on gas tube length as far as determining gas system type.

Nope, you have a carbine length gas system.

As for why there are so many 16" rifles with carbine length gas systems floating around, while it’s not the optimal location for the gas port, it does technically work. Plus it’s what the military has, so it must be great!

If you’ll notice however, more companies are starting to produce rifles with the midlength gas systems.