differences between carbine and midlength

i have a rock river mid length rifle and
i have decided to upgrade the rifle in a few certain areas
and use the old parts as back ups
the areas i want to upgrade is
bolt
extractor
buffer spring
bolt carrier
buffer
when looking for upgrades i kept finding kits to upgrade carbines
with the fine print saying that this kit will not work in mid length
so my question is is there an actual difference to these two systems
other than different placement of fsb and longer gas tube

the different locations of the FSBs causes differences in cyclic pressure… but i’ve never heard of any of those components only being good for one system or the other… that’s weird. where are you finding these warnings? what do you mean by “upgrade?”

well as far as upgrades
i want a mpi bolt and carrier thats properly staked
a h buffer
a 1:8 or 1:7 chrome lined mpi barrel with m4 ramps
a stronger extractor with possibly a o-ring
a stronger buffer spring
i want to make this rifle a reliable as possible
not saying that it isnt i just want to enhance it because the rifle
right now doesnt have any of these things
later down the line i want to buy a top shelf AR
but until then i want to make the best of this one

kry,

  1. You may possibly end up spending or almost as much to do the upgrade as opposed to getting a better upper. Just be advised that the market is tight and if you haven’t noticed quality parts are getting hard to find. I would price the cost of these items, to include shipping if they are coming from different vendors and then price the cost of a good upper from Bravocompany, LMT or Noveske and see where you end up.

  2. Get the new bolt and add the O-ring only if you need it.

  3. I would just stick with a good 1/7 barrel.

  4. You shouldn’t need a “stronger” spring unless yours is worn. The TM specs for a carbine length spring are 10 1/16- 11 1/4 in.

  5. Get a good “H” buffer.

  6. You can stake the carrier key screws yourself with a decent punch.

  7. Look at your upper receiver itself and see if it also has the M4 feedramp cuts.