Cutting Down a BCM KMR?

Honestly, I think a Dremel is a poor choice for making long straight cuts like you’d need to get a clean result on your handguard. The cutting discs wear quickly, you have to join multiple cuts, and the body of the tool gets in the way and prevents perpendicular cuts if you are too far away from the edge of whatever you’re cutting.

The right tools, I think, are a small fine-toothed hacksaw and lots of patience. You could use a Dremel to help start internal radius cuts, though.

Interesting.

What can you tell me about this rail? Weight? GI or propriety barrel nut?

Any chance for a “sneak peak?”

Proprietary nut, offered in both Ti and Aluminum. It is a 6061 Extruded rail. With the Aluminum nut, and a 15" rail, weight will be around 8.6oz.

All I have is some pictures of a 7075 version that was made from a solid piece of bar stock for proto purposes. Things have changed since then, and the mounting surfaces have been minimized. The lightening cuts on the top of the BALIOS-lite receiver set will be extended down the top of the rail.

That is some of the technical aspects so far. Doing 15" versions, and 7" versions first… then will offer a 12" Most likely.

this is a picture of a PROTO rail, and IS NOT! A production rail. It will be very similar, however the attachment point has been optimized since this proto rail…

So weight specs appear to be about the same as the KMR unless I went with something like a V7 titanium barrel nut. But we’re probably not talking about more than an ounce or two especially at the shorter lengths.

Are the slots in the forend MLOK? What about a Keymod version?

TIA.

I am going to have a long wait for the can so in the short term I am going to chop a 10" ALG M-LOK. It looks like the resulting rail will be about 8-8.5" (based on looking at the 10" vs 13" rails) and they are only $100-115 shipped.

http://algdefense.com/10-ergonomic-modular-rail-m-lok-gray.html

I can’t run a VFG on my planned pistol build, gonna need the AFG, and the new MLOK looks slick.

Yes, both M-lok and Keymod will be offered.

Are there any durability concerns with an aluminum barrel nut? What are the chances of bursting or rupturing from an obstruction in the bore?

We haven’t blown one up to see, but it would be an interesting test for sure. I have never seen an AR destroy the chamber area in a KB however. I don’t think the barrel nut would help in anyway either steel or aluminum. With that being said, I realize that the stigma of having an aluminum nut is hard to shake, so we are making the nuts out of titanium as standard. The aluminum nut will be offered as a secondary item for those looking for weight savings.

Cram a .300 BO in a 5.56 chamber and KB some rifles in front of a high speed camera would be an interesting test.

Hello, Redmist. Any chance you might have an update on the lightweight rail?

Waiting on packaging, and Ano… I expect it to be out just before SHOT.

there isn’t any tool that is great for cutting a straight line except a milling machine. you make it straight afterward by sanding on a flat surface or some other similar method.

A common chop saw with the right blade would make short work of cutting a handguard and the result would be more than accurate enough.

I cut down my MI SCAR rail with a chop saw. Make sure it’s a sharp blade and go slow. It’s a perfectly acceptable option if you don’t have access to a mill.

http://fnforum.net/forums/fn-scar-17s/61941-hey-midwest-industries-i-have-idea.html

I’d love to see a cut from just a chop saw be good enough. do show.

I don’t have a KLR handguard laying around to cut. Would a picture of an aluminum tube, bar or angle be proof enough?

Look at the link I posted above your comment. The cut was very precise, smooth and straight.

What kind of blade? maybe I’ll give it a shot.

-john

well a video would be best. show how you make one cut with whatever hand tool you want and show a quality finished product ready to be colored.

If I recall it was a DeWalt chop saw with a metal cutting blade installed. The trick is to go very slow and have a high enough RPM to avoid chattering.

I need to cut my KMR down to 13". I will post pics of the process.