Looking at putting in an order for a cmp special garand. I have the option for 308 and 30-06. Im thinking the 308 may be a better alternative in the future when surplus 30 dries up. Anyone own one of these? I want to know if they are as reliable and durable as the 30-06 version and if they are sensitive to any ammo types. Thanks in advance for any help.
Surplus 7.62 NATO isn’t any more plentiful than .30-06 surplus.
Unless you are going to use an adjustable gas cylinder lock screw, you should probably stick to ammunition loaded to M59/M80/M118 pressure levels… heavy use of commercial hunting ammunition will result in increased wear.
With a free floating firing pin, you also have the possibility of having a slam fire with commercial ammunition. You may never have a problem, but it only takes one round firing out of battery to make it a really bad day for you and the rifle.
If the rifle does not already have one installed, a 7.62 NATO spacer block for the clip well is a good idea… it prevents someone from loading a clip of .30-06 into the rifle.
I have a couple of .308 Garands. One is a match rifle, and the other is a regular old do-all rifle that I’ve used in classes, 3-gun, as a car gun, etc.
I like it a a car gun because it should do anything I need done, I don’t need to worry too much about any state laws that forbid it, with the action separated from the stock it fits in my rolling suitcase, clips store easy, etc, etc.
They basically work the same as a .30-06 one. About the only difference is the brass comes out in a slightly different direction (more like 1:00 than around 2:00-3:00).
No change is needed. Just the barrel. Some commercial .308 barrels need to gas port opened slightly. The Navy experimented with .308 Garands quite a bit (match and otherwise) and they ended up settling on a larger port diameter. That dimension escapes me right now, but I’ll edit it in later. I don’t know what port size the CMP is using, but if it’s standard -06 size, I’d try it that way first before taking a drill to it. My match one works fine with the -06 port, but my GI-style one did not. I opened it up a little- not quite as much as Navy specs.
Some people clip a coil or two from the ejector because the cases fly a little farther. I don’t. Let 'em fly.
The spacer block is unnecessary. Or should be. It’s not needed for function, and some say they actually cause harm. I don’t know, but by looking at it, I can see it could cause done interference or binding with the follower system. I have seem the plastic ones broken from use, so something is bearing hard against it. There are steel ones out there too, and I wouldn’t touch one of those. If using any, I’d use the plastic so it would break instead of something important.
I guess the spacer keeps one from shoving a clip of 06 in, but unless you have an 06 Garand, there should be little chance of that. If clip confusion is an issue- One of the regulars on Culver’s Garand forum that took rear sight covers and laser engraved them “7.62 MM”. It may not help much when loading eyes-off, but if grabbing one from a rack of 06s, it might help. I think it looks kinda cool, which is sometimes the important thing. I don’t think that guy makes then anymore, but I’d think you could get your own sight cover engraved. I did the fancy mod of using a silver Sharpie to write “.308” on one of mine.
Thanks for the info guys. The cmp installs the spacer block from the get go. I had already read up on them being a no go. I figured the heavier loads in 308 would be an issue as well. I may just roll with the 06 and start reloading if getting appropriate ammo in 308 is an issue. I have seen a few adjustable gas plugs online, which would you recommend? Id rather not have to use one but if I cant find surplus or the specialty loaded factory stuff I might as well have one lying around.
Barry I get where your coming from with it being an all around rifle. That is my plan as well. I travel to see family often and wont have to worry about communist laws in some states. Also I never thought about breaking it down to fit in a travel bag, good idea.
I’ve had my Arlington Ordnance .308 Garand since the mid 1990’s, i like it, built right it’ll never have a hiccup.
Get both. You can’t go wrong with either. I have sevral in 30-06 and two in 7.62. They are just great. I enjoy shooting them a little more than the black rifle but I don’t shoot them that much.
Dan
When I enquired about this over on the Camp Perry forums last year (IIRC and I may not), but I thought they were saying there is much more 30-06 surplus out there than 308… you might go over there and check with those guys
Thanks for the link Ill check that out. As far as getting both, I wish but not with 3 little ones to feed. Again thanks for all the input.
I feel your pain there. I’ve got two little ones and they aren’t cheap either but think of it as an investment. They aren’t making any more and safer than the stock market.
Then get the 30-06. Greek surpluss is decent right now from CMP. I believe that it is $98.00 plux shipping for 200 rounds. You really can’t beat that.
Dan
agr1279, ya I have decided to stick with the 30-06. Ive found a couple websites with alot of surplus for decent prices. While it would be an awesome investment I have other needs and a wife that will possibly castrate me if I buy any more rifles this month. I just ordered an AMD-65 for a junker rifle to beat the hell out of so after the M1 I think Im on probation.
Resurrecting this. I’m looking to get a Garand in the next few months, while I still can since I’ve always wanted one. I would assume that .30-06 will dry up before .308 will since the latter is still used in some battle rifles. Would you guys agree? If I ever got a DMR or similar it would probably be an M14ish or M110ish so having the same round would be nice there.
I doubt 30-06 will ever dry up. It’s probably taken more big game on this continent than all other calibers combined and probably will continue to do so for quite some time. There are also quite a few Garand owners now so the demand for the old aught six will remain strong. It has also been one of the more consistently available calibers during recent draughts.
The availability of aught six is actually one of the reasons I’m going to get one later this year.
Edit: unless you’re talking about surplus then I have no clue.
I may ride a little fast and someday it may catch up and bite me in the ass but maybe not if I give it just a little more gas.
The only reason I have a garand in .308 is because I’m already well stocked in the cartridge. My only regret is I feel slightly guilty at not having a true example, but it’s easier for me this way. As for 30-06 drying up, it wasn’t a concern for me, but I wouldn’t make the decision on it. Absolute worst case, you sent it in to CMP to have them rebarrel it in .308 for some far off future where space aliens trade us immortality for all our 30-06 cartridges and rifles, or some sort. I’ve been reading a lot of science fiction lately so that’s the best I can come up with right now.
Yeah I realize its popularity for hunting, but I’d strictly be interested in ball/surplus.
I was just eyeing one of these down…hard.
I have read that unlike the 30-06 Garands, you can run just about any .308 or 7.62 NATO you can find on the shelves through it without any trouble. That would be my draw to a .308 over a 30-06.
The surplus .30-06 is definitely on the way out. It just isn’t made any more and we are exhausting the last foreign stockpiles. I have 3 Garands and plenty if Lake City and HXP ammo and brass. But if I were in your shoes getting my first one it would be a serious consideration to go .308. You can still buy cheaper ammo like the battle packs of Priv Partisan and I believe some steel cased brands.
The Garand, in my view, is 30-06. .308 Garands are not “truly” Garands. It isn’t like you will never be able to buy 30-06 ammo in the future and companies, Hornady for one, are now selling Garand safe cartridges.
When it comes to historic rifles, such as the Garand you should buy it in the caliber it was fought with…However, I am a purist when it comes to Historic Milsurps such as the Garand, so take that with a grain of salt.
For a pure collectors piece, agreed 100%. However, for a shooter honestly I think .308 is the way to go now.
If you are going to be in the Anniston, Alabama or Port Clinton, Ohio area just go by the CMP store and you can handpick your Garand. I just went to Anniston and picked up a nice H&R M1 Garand for $525 and $24.97 to ship it to my house. It is easily an $800 rifle at the local fun show. 200 rounds of Greek .30/06 or was $118 and 200 rounds of U.S. AP .30/06 was $125. I bought a can of each, you cannot go wrong with either rifle.
If I’m ever down that way I’ll have to swing by. Turns out I have a .30-06 now though. I’d asked my dad to see if our neighbor (who is huge into surplus and antique firearms) if he knew of any locally - when I came home last night there was one on my bed.
Sent from my iPhone using Tapatalk