CMMG INC - - Where do they...

…stand in relation to others in “The Chart”?

How do they treat their guns?

I see chrome lined bores/chambers, 1/7 twist, parkerize under FSB, etc.

I’ve heard they’re good guns. A buddy of mine and I went to a show on Saturday and there were no decent carbines ANYWHERE…

There were plenty of DoubleStars, Oly’s, DPMS, Bushmasters, etc.

We came across a CMMG at the second to last table and I said, “Buy this one. It’s your best bet.”

Before you ask, he was dead set on buying one that day. There was no waiting in his eyes.

Thanks

I think CMMG is too inconsistent with their features to put on the chart. Some people have CMMGs that they love. The problems I’ve read about and seen on the boards is good enough to steer me clear of them.

Make sure your buddy doesn’t try to run a silencer on the barrel. :rolleyes:

I’ll try to show as much of the ugly as possible. That stated, there’s a reason I keep buying from CMMG, and I’ve been extremely happy so far.

I’ve got three CMMG Uppers, and a pair of lowers. The key points is that they currently use CMV steel barrels, 1:7, chrome lined, correctly cut M4 ramps, which is more than adequately close to spec. Carriers on mine were all properly staked, they’re sourced from CMT (like many others) but my only gripe is this: everything is MPI but not HPT tested. The TDP states HPT then MPI for a reason, so as a result, I’ve replaced all my BCG’s with LMT or BCM ones, and keep the CMMG units as spares.
The only remaining question is chamber spec - some have stated that tight chambers were an issue, while others recently have said theirs were actually 5.56 chambered.
Canted FSB’s are occasionally seen as well, but mine have been fine.
Regarding bore concentricity and threading: there’s plenty of folks that run cans on there anyway, and report great results - but the inconsistency is the only reason I won’t run my CMMG’s suppressed.

Others have had issues with CS, but my only and cheif complaint is that they were hard to get ahold of, and their answering service was ill-equipped for the volume of traffic.

Stake the castle nut yourself (or just use a UBR)
Replace the BCG with an LMT/BCM/GTS one, keep the CMMG as a spare.

In that condition, CMMG will outclass everything below Colt, LMT, Noveske. Considering the barrel options CMMG provides, and their bundled prices with MUR Uppers, and LaRue/DD rail systems, they’re extremely hard to beat for the price.

Perfect answer: “inconsistent.”

Not to sidetrack the thread, but does anyone know where their LPK come from?

It’s been posted that many of their components are of DPMS origin.

Thanks for the replies everybody…

Keep 'em coming.

I’ve got a CMMG. I custom ordered an oddball configuration, and it was barely $800 out the door. I’ve fired fewer than 200 rounds through it, but without any problems.

My castle and gas key are staked. I’m not too worried about MPI or HPT testing.

Re: customer service: I recommend buying through a dealer. They discount CMMG’s prices, and my customer service dealings were through them, not with CMMG directly.

I would buy another CMMG…

hmmm… i ordered a cmmg barrel with fsb. I hope mine arrives not canted

They have their own 2-Stage triggers, but my personal suspicion is that their LPK’s are a mix of DPMS and CMT parts, likely depending most on availability. I wouldn’t expect them to disclose this; that said, I haven’t heard complaints with CMMG’s and pin sizing, which seems to occur with DPMS stuff from time to time.

Since you mentioned canting…my first experience from them was a canted FSB…after a 3.5 month wait.

I have 2 CMMG upper & I have been more than satisfied with their quality & performance. Not one ftf, fte or anything else. Both mine are the midlength medcon barrel profile which I like over the gov’t profile that most everyone else offers in a middy. Their finishes are very nice. As mentioned by tehllama, I too upgraded the CMMG bcg’s with LMT’s (just because of the MP thing). I think they are great & I would trust them in a crisis if needed. Their customer service since the elections has been shabby but most manufacturers/distributors CS has been lacking due to the craze lately which is to be expected with the demand.

A guy at another forum I go to highly recommends them. He mentions them in the first post, and goes into more detail in post 10. Hope it helps.

http://forums.officer.com/forums/showthread.php?t=81462