Building a 1911

I have been considering building a 1911. I think redefined’s post came on the perfect time for me since I was considering probably buying a cheap 1911 and then start the customization, however, my real desire is to build one from complete scratch. What should I do? What is a good page to buy anything and everything for the 1911 platform? Where can find a good guide to building a 1911? Thank you for all your help. This is going to be my first 1911.

http://how-i-did-it.org/1911-project/index.html

Major lesson there is use quality parts.

http://www.blindhogg.com/gunsmithing.html

I guess that’s a good resource too.

There’s some books that are very valuable if you’re getting into 1911s, but I can’t remember the name because it’s a long German name. :confused:

I believe you’re thinking of Jerry Kunhausen. Very good info there. Check out this thread and others at 1911forum for good info.

I’d suggest resisting the urge to build from scratch, especially if you have no experience with a 1911 (not to mention no experience gunsmithing a 1911).

Buy a basic pistol like a Springfield Armory GI or Mil Spec and make one modification at a time.

This is VERY good advice.

Joe Mamma

You are absolutely right. I will probably buy a Springfield GI1911 since they have a good slide and frame then go from there. Is there any other cheaper 1911 that has a good slide and frame?

The first thing I will do when getting it will be detail stripping. I am in luck since we have a gun show in my town this weekend. Which parts should I start by replacing with quality ones first?

I would do lots and lots of reading over on www.1911forum.com as I did. They are very helpful and mounds and mounds of information.

Tooling gets expensive. Thanks to a local buddy I didn’t have to buy much as he already had the specific tools, jigs, and files required for most of my work.

www.brownells.com is not only one of the best places to get parts but it also has a lot of how-to as well.

If you have any questions shoot me a PM!!!

Oh and I’m with the others as far as building from scratch. The next thing to do is ask yourself how far you’re going to take this pistol. What all will you be replacing? Then you/we/I can help choose your starting platform. Looking back I should have started with a GI instead of a Mil-Spec but I didn’t think I would replace the sights, yet I did.

Hilton Yam’s 1911 articles are very useful: http://www.10-8performance.com/Articles.html. More specifically, his Parts & Mods article will give you a decent idea of what to look for.

Build from Scratch…are you sure? Get out the credit card. The learning curve is steep, but if you are going to do it, might as well do it right. Tools alone will be a lot.

https://www.m4carbine.net/showthread.php?t=62993

I went to the LAV class (-012 is mine). That pistol, while ugly, resides in my SWAT holster, runs 100%, and is plenty accurate, so ugly is as ugly does.

LAV delivers a whole lot of knowhow in 6 days. I’d love to go audit another class if I ever catch up, which I won’t.

I’ve since built several more guns, and my last is a Colt rebuild, which is NICE by anyone’s standard. I’ve got a Commander on the bench now for the wife.

While the initial investment is steep, if you are serious about it, it will pay off in the long run.

Eventually, you’ll want to learn more, and I’d love to take some other classes (in no particular order):

http://www.cylinder-slide.com/1911tacticalclass.shtml

and / or:

http://www.rodgerspistolsmithing.com/1911class.html

and / or:

http://garthwaite.com/services/classes.php

Pretty soon you’ll need a milling machine…and an FFL.