I need a bipod that does not take up too much real estate:
My Harris bipod on a Larue QD mount sits too close to the VFG and puts the sharp, pointy parts of the bipod mechanism too close to the hand when using the grip; I’d like one that will leave a bit of room up front, or at least not have exposed operating parts like the Harris.
Good LORD that thing looks front-heavy…
Would an Atlas be small enough?
You don’t need a different bi-pod, you need a longer rail to get the bi-pod away from your hand.
Sorry, couldn’t resist. The only bi-pods I have experience with are Harris and Versa-Pod, neither of which will fit your needs.
a versa pod may be your best bet based on your current set up. I only have Harris bipods that work great and are light but they do take up space.
I take it you are referring to a Versa-Pod Lightning or Thunder that does not fold? My Versa-Pod, when folded, takes up as much room as my Harris. Mine is a prototype, but the production model would be the 251.
Sweet rifle BTW!
TangoDown bipod
http://tangodown.com/shop/product_info.php?cPath=27&products_id=41
Vltor bipod
http://vltor.com/modpod.htm
Atlas bipod
http://www.accu-shot.com/Atlas_Bipods.php
Thanks! The Atlas looks like it might fit the bill…a bi pricey though.
I’ve had my eye oon an Atlas / ADM combo for a while, but you’re right, they are pricey. The Vltor might not be a bad option either, but they are kind of bulky.
Just thought I’d pimp the locals…
I’m still using a GRIP POD as my primary BiPod. Still have not found a bipod that meets the low profile requirement I’m looking for better than it does. I know what I want, but need someone like KDavis to actualy prove if it will/will not work from the production stand point on my VIS3 and VIS2A recievers. Same basic concept should work with other rails.
Preety sure that it can be done, but would likely require replacing or modifing the Lower VIS Handguard assembly. The ModPod is close, but not quite it. I think it can also be done in another direction, but again I’m no designer. :sad:
Bobro makes another option also.
Bi-pod Type 3- BLAC | Item No: BPS-3
I think the perfect low profile bipod would the type that was on the FAL, just adapted to fit 1913 spec FF rail. so it would blend in like it does on a FAL.
Sshhhhh
I wanted to get a bipod but thought the ubiquitous Harris ones were just too big and heavy for what I needed. I wanted simple, light and compact and happened upon the Atlas. Highly recommended; very compact, very well made, and easy to adjust with the quick release everything to extend\move the legs, even one-handed. Plus you have a ton of position options.
That’s what QD mounts and index clips are for. I have a FUG and a Harris on a Larue QD for exactly this reason. Having a grip AND a bipod just seems waaaay too busy for me.
You really only need one at a time and having both compromises the weapon handling when the grip is being used, IMHO.
Ok, i am going to attempt this. I’m currently using two differant bipods, a Gripod and a Harris on a Larue base. My prefered bipod is the GripPod for general purpose use.
I prefer the GP mainly because it is lower profile and less likely to snag during such things as CASEVAC, ect. The Harris is no doubt a better precision bipod, but I hate to carry it around on the rifle all day with the legs sticking out.
Most soldiers don’t have the extra real esate on their vests to take the bipod off and carry it, so they might end up leaving the bipod at the COB like this Marine appairs to have done.
Thus what I want MY bipod to do is provide a low profile solution similure in concept to the old H&K, FAL, ect bipods, but updated for use on a free floated rail system. Tucked neatly between the rails while patroling, but able to quickly be employed if needed. I’d like it to pan and tilt at least a little and I’d like it to have adjustable legs. Light is another bonus.
I have a few ideals for how it might work, but realy need someone that can do CAD to nail it down, because I also often come up with issues about how it’s intergrated. That’s the bipod I’m waiting to buy. Until then I’ll make do with what I have:(
I would strongly suggest the ATLAS, i had a harris, but after getting the ATLAS i don’t ever see going back to one. the v8’s are extremely nice and depending on the mounting option you get only take about 1-1/2 to 2-1/12 inches of rail. i got the dual screw attach one and it only takes about 2 inches of rail, it’s pretty compact and is easier to load while shooting. but thats just my $.02
Harris makes some of the best pods on the market, they are rugged, easy to use and maintenance free (just a quick brush off and lightly WD40’d)
…and untouchable for the price. No doubt Atlas is great, as would be all these options mentioned, but if you see the value in having a bipod, why not just get a Harris and deal with the inconvenience, at least until the bipod of your dreams comes to market. Just 2 cents.
I looked at the Atlas for the LMT MWS but in the end the cost was hard to justify. I already had a harris on a rifle I wanted to sell. I ended up getting a Larue QD mount for the Harris bipod and am happy with that setup.