What do you guys think is the best m&p trigger job and WHY? I would highly prefer to NOT have to send it off… so maybe the apex? I have a great smith that lives right next to me that can do the work.
Im a little new to this trigger job thing so if you guys could school me on it that would be great.
The APEX kit really isnt hard to install. I just watched a friend do it a couple weeks ago. You just use the takedown tool and a small hammer. A pair of tweezers help also.
For the striker portion he is just going to wait until his night sights come in since you have to drift the rear sight off. Its a good time to add some sights and just have a smith do that portion. the sear and trigger spring is pretty simple.
I havent done my trigger yet, have done a lot of research, but most just replace the sear with a hard sear. The APEX kit does this then replaces the trigger spring to make the pull “harder” after the sear lightens it. Then the striker block cleans up the reset. So you get a lot more vs. other trigger jobs. It just cleans up the whole system instead of just lightening it. Or so I understand it.
I seen somewhere there is going to be a kit that reduces pretravel coming out soon. Uses its own sear. You may want to hold out for that if your interested. Search for user “Randy Lee” on the M&P pistol forum.
I have the Apex sears and kits on 3 of my M&Ps, but plan on sending one of them to David Bowie for a trigger job.
I was shooting at my local range the other day and a guy there had a M&P9c that he was shooting. I happened to have brought the same pistol which has the apex sear, while his had a Bowie trigger job. I couldn’t believe the difference.
We compared the two and while I am a fan of Apex sears, it did not compare to the Bowie. His trigger was exceptional and the reset was almost identical to the glock reset that everyone is looking for.
The two mags that I shot through his gun had me sold and that would be my recommendation!
Having had apex and a few others since mid 2k when i started running Mp
Not a single trigger has impressed me more than the triggers by dougw
a local guy here in Michigan,
His trigger in the Mp are more glock than glocks and his other triggers depending on what you want are silly My match gun is smooth and scary fast… its hard to explain without really shooting them first
Ditto here. I have a Bowie Tactical trigger job on my 9L. If you can suck up the cost of shipping, and can live without your gun for 4 months, there is no better trigger job, IMHO.
I like a short, 4 pound trigger with no over travel and minimal pre travel.
The bowie LX trigger job is one of the nicest trigger jobs ive ever felt however, he uses stock sears that he stones and polishes. I simply dont like cutting through heat treat as i have done my own versions of the bowie LX trigger jobs and i always regard it with a healthy dose of “hey, you gonna go full auto today?”.
Some other people work very well with a revolver like trigger travel and a crisp yet slightly rolling break. For them, the Apex sear works wonders.
Best is almost always subjective, in this case it is 100% of the time subjective.
Define your criteria and then perhaps this discussion will have merit beyond mere opinions.
Steve, can you elaborate on the M&P Glock like trigger that is more Glock than M&P?
Another option for some people who only want to live without their gun for a week is to send it to Apex Tactical and have them polish everything up, tweak the reset, upgrade the sear block if you need it and make sure that there are no problems with tolerance stacking. I’ve done most of this for both my M&P’s and they came out fantastic! The issue of pretravel is a problem for some which they will address but for the majority of people, Apex’s current offering will make them extremely happy.
For my FS9 which had a pretty good reset with the Apex installed DCAEK it increased the ‘tactile reset’ enough that i can tell, but not as much as the initial installation of the DCAEK alon which probably involved bending the trigger bar for more reset.
I have had triggers by all of the popular guys at one point or another they went burst on me or
others gave me false resets
apex was different in every Mp i owned never the same.
Doug’s new enhanced trigger job is outstanding
smooth clean crisp you have to shoot it to understand it and to feel it
think cross between 1911/glock
First, let me say that our parts were never meant to take the place of a pistolsmith’s action job. They are drop in improvements that do not affect warranty. They perform well, but the parts in and of themselves cannot compensate for tolerance variations, friction or drag points and the like. I suspect this is why as Steve mentioned that his results with our sears varied from gun to gun. Unless you adjust each individual gun to be identical, the results will vary in weight of pull as well as location of striker release and reset.The pistolsmith will typically address issues within the system and adjust parts as necessary. We do this whenever we work on a pistol or revolver.
Every pistolsmith I have ever had the fortune to meet or work with has in depth knowledge of their specialty. This is why they often have backlogs that are measured in months and sometimes years.
That said, I believe our parts can assist a smith to achieve the desired results with less effort.Our forward setting sear for example has a longer than factory sear cam surface that gives a custom pistolsmith the option to cut the profile to his/her liking. Our parts also allow the tinkerer to work on their own pistol with proven parts that are durable and the gun can always be returned to stock factory specifications.