BCM/JP based 3-gun build.

This past year, I finally felt like I had gotten to the point where I was shooting well enough that I wasn’t the weakest link, and a new rifle would benefit me at 3-gun matches.

I opted to shoot limited/irons, but went with a flat top in case I ever make the switch to optics.

This wasn’t a pure budget build but I did try to avoid spending money on anything that wasn’t absolutely necessary.

Here is what I came up with:

BCM SAM-R 20 inch barrel (1:8 twist, MP HPT, 410 stainless)
complete blemished BCM upper
JP lightweight bolt carrier
buffer lightened to JP weight (3 weights replaced with delrin spacers)
LMT A2 rear sight
JP low profile adjustable gas block
JP Bennie Cooley compensator
DPMS front sight base (still experimenting with a variety of front sight posts/apertures)
DPMS free float tube
GI take-off A1 stock (had an A2 on it, it was too long)
BCM MP,HPT bolt
stock trigger worked over by Ryan Zamberlan
BCM gunfighter charging handle (medium latch)

I haven’t done any load development for this rifle yet. Still getting a feel for it with M193. It shoots FLAT. Initially I thought I had made a mistake going with a barrel this heavy. Had it out at the range doing some practice drills yesterday, and I didn’t notice the weight at all. I DID notice how little sight disturbance it had and how quickly I could get two hits on target.

Hopefully I will have some positive results with which to update this thread after some load work and a few matches. So far it looks like it will shoot very well. I’ve shot some pretty decent groups with M193. It functions great, moreso now that it has been broken in a little. If I get greedy turning the gas down I have had some short stroking with British Radway Green.

With the A2 stock:

Comments/criticisms welcome.

I think you’ll be happy with the build, I’m a 20 inch man in 5.56, and I like the long site radius. The brake is LOUD, but works well for the game. SS barrel should be accurate and perhaps a little less life vs a chrome lined, 3 gun is harsh on barrels. My past 3 gun AR’s used SS too, Got to love an accurate rifle, I’d just change barrels every year.

How do you like the lighter buffer and carrier, does it feel or sound any different from your past rifle? Will you upgrade to a different trigger package in the future, or is the smithed one crisp and with a fast reset?

VERY nice, I’m certain it’ll serve you well for Limited division.

https://www.m4carbine.net/showthread.php?t=74358

this stock would be a nice addition, cheap and a1 size

Very nice, and very well thought out. Would like to do something very similar at some point as funds allow as I do enjoy shooting limited on occasion.

This rifle feels drastically different from my past rifle. But I was shooting a pencil barreled, carbine gassed, 16 inch rifle.

Almost every component of this rifle would have an advantage over my carbine with regard to how soft it shoots.

I did get a chance to shoot it right along with my buddy’s standard 20 inch A2. Based on that, the comp, lightened buffer and carrier, and the adjustable gas does indeed make a big difference. I don’t notice any difference in sound. I put a little grease on my buffer spring to reduce the sproing.

The smithed trigger feels great. I have pulled a JP adjustable quite a few times, and the difference isn’t enough to prompt me to upgrade.