I’m currently trying to decide between 10.5 or 11.5" CHF barrels for my pistol build (which may eventually be an SBR, not sure yet). It may be suppressed in the future, but not soon, as obviously even if I picked and purchased a suppressor today, it looks like it’s taking anywhere from 9-15 months to go through approval. As such, I’ll probably use a KX5 on whichever I choose for the time being, as I don’t even plan to pull the trigger on a suppressor until early next year.
That said, I’ve been reading people saying there’s no reason to go with something like Noveske CHF when you can get the BCM for less. Maybe that was true at one point, but Noveske’s own website shows their 10.5" with gas block already pinned and ready to go for $350. The 11.5" BCM BFH STRIPPED is $310, so I’d probably be looking at $410 once a block is purchased and pinned. The DD 11.5" with pinned LPGB is $330, so why so much for the BCM? I haven’t seen any DD 11.5s with pinned GB in stock anywhere, but HAVE found the stripped barrel for $289. So, is there something that I don’t know that makes the BCM worth $20 over a DD? I’ve never seen anyone state a BCM barrel was more accurate than a DD. Would anyone expect the Noveske 10.5" to be more or less accurate than a 11.5" DD or BCM? (I ask because I remember reading posts in the past where people claimed their 10.5" Noveske was the most accurate AR they have ever owned, but I would imagine that was back when John was still around)
11.5" barrels are more reliable than their shorter cousins. That 1" of length makes a significant difference in dwell time which translates to more reliable performance. As for the price discrepancies between brands I couldn’t tell you. I will ask this, does $20 make that much of a difference? I would go with whatever is available.
Thanks for the reply. No, $20 doesn’t make a difference, I just would have assumed the difference would have been the other way around with DD being the more expensive of the two, knowing the reputation of DD. That was also part of my reason for wondering if there was something new about these BCM barrels that I didn’t know. I’ve never seen a BCM barrel being touted as even AS accurate as a Noveske or DD. I’ve seen that they are close and that their accuracy is acceptable, but that Noveske and DD seem to be accepted as the most accurate as far as CHF barrels go. But again, from DD, their 11.5 with their LPGB is $330. So I’m probably looking at a $80 difference between BCM and DD if I chose to wait on those to be back in stock.
The Noveske barrels I have measured (port size) have been ginormous. Adding the KX5 isn’t going to help it. I would stick with an 11.5" barrel.
There are other options than just Noveske and BCM. I have over a dozen AR’s with CHF and standard barrels I cannot see any tangible difference. In addition there is no need to have a gas block pinned. I have over 40K aggregate rounds through multiple configs and have yet have a gas block loosen that was CORRECTLY installed.
Makes sense. I’ve never installed a gas block before, so I’m not exactly sure what “correctly” means, haha. Feel free to shoot me a PM with gas block recommendations and install tips. Maybe the DD 11.5" is the way to go after all if I don’t need to pin a GB.
Use the ‘Easy and Secure Installation’ - I’ve installed 6+ this way and haven’t had an issue. I bought my first one with an ALG Rail just to save the hassle of ordering from another vendor. Glad I did, simple easy to install, good quality product as you might expect from Geissele.
It don’t have a marque name, but all these boys do is make barrels - including for other manufacturers. As I mentioned, I have the barrel in my SBR, it shoots good, and ejects on the money if you are into the whole ejection angle thingy. I do have a LAW folding adapter on the SBR so the BCG does have the LAW extension plugged into the rear of the BCG. I use a standard carbine spring and an H1 buffer FWIW.
Was not dimpled - I dimple my own per the Geissele instructions. Port is big, .087 according to them. Mine isn’t over gassed BUT I have whatever weight the LAW extension adds to the BCG and my suppressor is in jail so it is unsuppressed at this time. I am running an Iron Pig looking Krinkov flash suppressor.
Can’t say for sure with the Fortis but it will not fit under most slim rails.
Edited to add:
Just looked it up and the Fortis Rev II ID is 1.34". It will not fit without contact as I’ve tried the Super Gas Block on an NSR with an ID of 1.35" and it made contact. When compared with a true low profile gas block the differences are obvious.
It should the ID’s of both are a little smaller than the ALG Rails I use, but the rail on top should provided clearance. It is a low profile gas block.
BTW have you looked at the ALG Defense rails? A little less pricey and I think the attachment is more secure than the SLR Ion, not sure about the Fortis, I didn’t pay attention when I checked the ID.
ETA: It looks as if 556BlackRifle has direct experience with a rail it wouldn’t fir under, I’ll defer to him.
Here is the cross section of the rail I was refering to -