I recently saw the new AXTS AR15 lower using the new A-DAC pin but this really ups the anti. It’s 7.62 AND its truly ambi, bolt catch & release. Oh and its PMag compatible 
Found this on WEVO.
Link to video - http://www.youtube.com/watch?v=4UkYrMiNYPk
-T
There are many other threads showing this lower, but heres the latest anyway.
When will these be available for purchase ?
Does it take DPMS or SR25/AR10 pattern uppers?
it is an armalite lower, so I would guess it takes ar-10 mags.
Takes DPMS LR-308 uppers and SR25 pattern mags.
interesting, so it is not an armalite style lower then.
The mil spec forged lower with the A-DAC feature built in is the A-DAC-F
The 5.56 NATO 100% ambi billet lower is the AX556
The 7.62 NATO 100% ambi billet lower is the AX762
Here are some pictures, enjoy!
A-DAC-F
AX556
AX762
very nice. what is the price for the finished lower as shown?
Wolfen,
The AX762 lowers that we showed at SHOT were prototypes we completed just in time for the show. They have to be thoroughly tested before we go into production. During this testing phase we will also be exploring more cost effective ways to manufacture the custom steel parts that go into the lower. The prototypes were all machined from solid tool steel which is quite expensive.
All that to say I cannot answer your question on price right now. I do have a pretty good ballpark but would not want to have any unhappy customers before even selling a product if I am off.
gotcha, no problem. until you get into production it is hard to figure costs.
Worst case delivery date on these:D
All I should say at this point is sometime this year.
I have never been so eager to bankrupt myself. Looks awesome.
Not familiar with the dpms /sr-25 pattern, will this lower fit the ma10 upper from mega?
Not exactly. The takedown pins will line up, but the cut at the rear of the MA-TEN upper is angular, whereas the cut at the rear of this lower is radiused. So, there will be a gap between the upper and lower.
surprised the billet lowers dont have the 68 degree selector markings but then again they are prototypes arent they…maybe next week I’ll get around to putting in my pre-order for an Adac-F lower really like the idea of a 45 degree selector…the bolt catch mag release integration is just icing on the cake.
You are correct in saying that the prototype would fit the MA TEN but leave a gap. The prototype was only made to fit a DPMS upper because that is all we had on hand just before SHOT show.
We are currently designing a billet upper that will have the angled SR25 interface and the AX762 lowers will of course be updated to this style as well to create a matched set. In theory the production AX762 lower should fit any SR25 pattern upper ( MA TEN included) although we cannot garuntee it will fit other makers uppers due to their varying tolerances. The AX762 upper lower set will match up perfectly in every way in terms of fit, form, and function.
So your upper will fit a LMT lower??
Also can you use a SR-25 URX on it???
I hope so, that way i can build a SR-25 style upper for my lower
FREE
Thanks for your interest in our products.
Our billet AX762 upper should fit the LMT lower since it is an SR25 pattern design but we cannot guarantee this since we do not know what dimensional tolerances they hold their receivers to in the manufacturing process.
I don’t know if the SR25 URX rail handguard will fit it. Honestly I had not thought about it til you brought it up. I will do what I can to see if we cant make our upper design compatible with it.
Since we do not have access to the tolerances other manufacturers use when producing the SR25 pattern, it may be in the best interest of both our customers and ourselves to only offer the AX762 as a matched Upper/Lower set. The last thing that we and our customers need is to have an upper not fit another makers lower or vice versa. Not only would both parties lose time and money in having to deal with returns, we would undoubtedly end up with returned uppers that were dinged or scratched. This would cost us money in no longer having an upper that was suitable to sell in new condition.
You can kill two birds with one stone
Make the upper and lower so the are cross compatable with LMT/KAC/Larue uppers and lowers
Also make the upper so it will work with the SR-25 URX, that way all of us guys with LMT/Larue pattern guns can build light weight uppers to replace the LMT upper without the KAC price.
If you do this you will create a cheap yet great 308 upper/lower and fit the need of a low price/lighter receiver replacement for us LMT owners
FREE