AR500 Plates good to go?

What do you do for a living if I may ask?

Wanted to discuss some of the threat levels that brother Adam pointed out. Before you get too deep into the selection process I would recommend that you do the following:

Define you requirements. A lot of times we have clients that approach armor with the “for classes” “SHTF” etc as the rationale for purchasing armor. Always start with the most likely threat(s) as the start point. One has to take a good look at what the most likely (not most dangerous, not “might be a threat”) to determine the level of protection. If not, you can end up chasing a solution to a problem that may never exist for your particular set of conditions. CONUS civilian threats are a bit different and probably narrower than mil or what a PMC going to Astan might encounter. As there are gaps in the performance of some materials make sure you understand and account for them (eg M855 vs pure UHMWPE, (X)M193 vs steel). We cant protect against everything, we can choose a solution that is inside the required parameters.

Once you determine the most likely threat(s) the balancing act begins. As with most things in life armor is a series of tradeoffs that have to be weighed and assessed to determine the best one to meet you requirements. These are protection, weight, cost, and durability. Materials, manufacturer, size, cut, shape, and even NIJ certification are all elements that will influence those four criteria.

There are far too many options available these days to simply default to the cheapest. I admit I am not a proponent of steel armor (except in very specific applications for very special jobs), but when you look objectively at balancing protection, weight, cost, and durability you might find there is a better solution out there for you. FWIW

Uh, you seem to keep getting M855 and M193 mixed up.

M855 was designed to go through a Soviet helmet at distance, not steel plate per se and is easily defeated by most AR500 plates. People view it as a cheap AP like round, which is why so many videos exist of AR500 plates defeating M855… the rational being if M855 is stopped, every other 5.56 will be stopped as well.

Thing people over look is velocity- M193 has a higher muzzle velocity, and combined with a longer barrel (20" on a standard AR-15 rifle) it will go through AR500 plates like butter.

Ironically ultra lightweight polyurethane plates stop M193 and are defeated by M855.

Ceramic stops both.

How thin of a plate? 1/4" will stop M193, but it will pock up the plate. I think maybe some of the body armor plates may be made a little thinner for weight savings.

I’ve seen 3/8" AR500 fatigue an perforate the steel. I agree M193 at close distances is brutal on AR500, but I’ve not seen it go through like butter.

Were you using a 16" or 20" barrel? Also we’re talking about body armor plates, not target plates.

Not Mark but I saw a video yesterday by currahee and he shot an ar500 plate with m193 out of both a 16" and a 20" ar. All four shots (two from each rifle) punched right through the plate

Sent from my iPhone using Tapatalk

First off-Thank you kaltesherz for correcting me. I was wrong in that, and have edited that incorrect information out of my post. This is what I get for posting when tired.

Next-I’ve seen M193 zing steel plate as well. Maybe I saw bad steel, a particularly hot round, or the moon was aligned with Mars just right. Take that for what you will.

As Appalachian said-determine your threats, and start doing your balancing act from there. Don’t go chasing unicorns.

Finally-if what I do for a living needs to enter this discussion, I’m just a pharmacist. I’ve taken a fair bit of time to read and research on this topic though out of personal interest, and have discussed it with someone who is just a dentist-and formed my own opinions.

Technically correct but in practice level IV typically stops the same things as level III plus the AP stuff (http://www.bulletproofme.com/Body_Armor_Accessories_Rifle_Protection.shtml#Levels) and multiple youtube videos show level IV plates stopping multiple rounds.

Given that I’d rather stop multiple rounds of various ammo and have the ability to stop xm193. Don’t get me wrong ar500 plates are nice but you need to know the limits so you can decide on the armor that fits your expected needs best.

What steel composition are these AR500 plates people are punching through?

There are differences in cheaper plates vs quality more expensive steel plates, thickness, steel used, process of hardening, etc. I have target plates that have seen thousands of rounds of m193, thousands of rounds of 9mm, and thousands of rounds of Soviet 7n6 and they’re still standing with pock marks at the most.

There’s a huge difference in thickness (and therefor weight) between target plates and ballistic plates. While not all AR500 is the same, there’s a reason the MIL / LE don’t use steel plates anymore. It’s too heavy, uncomfortable, and can’t defeat all reasonable threats (generally).

Thanks guys for the great wealth of knowledge.

First threat is guys on the range during classes.

Insert 2nd threat and what not

Last would be SHTF

While I have given though to which is great threat from day one comes back that most peoples shoot combination of M193 and M855. At least I do, so that’s where the problem/ balancing act starts.

AK round while has more inertia, it does not have the velocity. Anything over 3,100-3,200 ft/sec will go through AR500 plate.

I believe most of the 'armor" AR500 plates are 1/4 inch thick, while target are 3/8 or larger.

One thing not mentioned so far (that I saw) is spall. While you can jury-rig it with soft armor or LineX or something, do you want the risk of a round peppering your throat or face?

the coating would hold it (hoping)

The youtube and in person testing I’ve seen of the ar500.com coating reduces spall/fragging to 0.

At what angle if impact? 100% perpendicular sure but how well does it do at say 45* or lower? In the past I’ve sent emails to both ar500 and the target man specifically inquiring on that attribute and I never received a clear answer.

Sorry never seen that kind of testing done.

Yea, that’s my biggest gripe. Logic dictates any coating will do absolutely nothing to mitigate spall let alone stop a ricochet. Only the likelihood in real life of receiving anything other than a straight on hit is obviously much much higher.

Better than no plates at all I suppose, but still.

Most steel targets give you a minimum safe distance for rifles, and that is to allow the velocity to drop before it impacts the steel.

Example: http://store.actiontarget.com/statictargets/pt-torso.html

  • Steel grade: 3/8” AR550 armor steel
  • Handgun shooting distance: 10+ yards
  • Rifle shooting distance: 100+ yards using ammunition below 3,000 fps

Once you cross the steels velocity threshold, rounds can literally melt/punch right through it.

Not to mention target steel is thicker than armor steel.

AR500 is the Bushmaster of hard armor.

I am really curious to see their new line of level 4 plates get tested.