Anyone tried the Fusil USA 1050 Steel M16/M4/AR15 Mags?

Has anyone tried the [b]Fusil USA[/b] 1050 Steel M16/M4/AR15 Mags?

If so, what are your comments?

Zippy,

My guess is that most of us here are not desperate enough to drop 40.00 on a steel magazine. I would only buy them if a ban was being enacted tomorrow.

delete

If I’m reading their website correctly they aren’t selling to civillians at this time.

I’ve got 5 of them and man are they great!

The best way to describe them is a blend of a HK mag with a PMAG. First, they hold and run 30 easily and are built strong. Too, they won’t deform like PMAG’s can at the feed lips.

A little tip that isn’t read by many is that the little plastic cover on the PMAG’s are go/no-go gauges and the PMAG’s have a temperature exposure limit.

Fusil is probably not selling to civilians as in talking with their US distributor, he’s sold over a million of these in the last couple of months to military, LE & PSD. They work and are great. Pricey? Yes. But a good mag that runs? Priceless.

Rich

I can easily afford their mags but I am happy with PMAG’s. I would possibly consider buying a limited quantity for T&E, but wouldn’t commit for more unless I really saw improvement and they lowered their prices.

Whats more little known is who is using PMAGs to do bad things to bad people.

Yeah…we had them in Afghanistan last year.

Rich

Brownells has them in stock for $30/mag, $140 for 5 mags. $30 isn’t unreasonable for a quality mag. considering their made of steel and not plastic moldings. I have PMAGs and agree their outstanding, still they have their limitations. In a perfect world, I would have liked to see PMAGs have molded in hardened steel feed lips as an option.

Correct me if I’m wrong, but doesn’t the Lancer magazine have steel fed lips?

and…

Good, bad?

Correct, Lancers do have steel feed lips. Unfortunately, Lancer bodies aren’t as rigid and they don’t have an anti tilt followers like the PMAG.

The Lancer does have steel reinforced feed lips.

My question to those who think that PMAG feed lips are inferior to metal mags…where are you getting your data. Source please?

I’ve been using them pretty hard for a year now, they’re loaded 24/7 and there is no deteriorization, feed lip spread, deforming etc.

And if the reply about PMAG’s is based on “Extremes”, please think about the fact that if a Hummer rolls over a metal Mag…it’s done! Period.

I’ll tell you something else about another Polymer mag that everyone thought was a POS, and that was the “U.S.” made (not Canadian made Thermolds.) I have 5 that I bought in 2000. They each have at least 2000 rounds each on them and they function 100% in both of my Carbines. No feed lip spread, no melting, nada. And they still have the original springs in them as well as being fully loaded 24/7.

delete

If all you have left is a Pmag that was laying in the road and ran over by a Hummer at 30mph you were in bad shape already.

I have watched a ton of mag videos testing to see how far a mag will go till failure, my question is other then the military putting them to hard use which is understandable, how many of us civilians are actually going to either treat or put our mags to those types of abuse that the mag companys has already did in their T&E testing? Just my 2 cents, from what I’ve seen in these videos is no matter what mag it is with enough damage or pressure it will fail and as for pmags vs 10,000 lb hummer, it think it held up to more then any normal everyday joe who takes care of their mags will ever put it through, and as for cammenga I don’t trust the slide deal on it , you get into a fire fight is there really gonna be enough time to slide it back and reload it? plus more moving parts to fail. like I said just my 2 cents worth and opinion.

The pmag video is not any kind of conclusive evidence… the pmag was driven onto or run over 4 times before it broke… c’mon. and he thoroughly packed it full of dirt- dropping a mag in the dirt does not pack it full. i dont believe any mag would have passed that exact test.

i ate green eggs and ham with pmags- but i don’t trust the alphabet mag. i have no use for the slide thingy, it’s just a moving part to fail on you. and they’re expensive.

delete

Rich,

Exactly what “tip” are you referring to in this post? And what do you mean by “deform”? Magpul has never published any temperature limitations for the PMAG, nor will the lips of the magazine deform under any circumstances (they break before any permanent deformation can occur). That is not to imply that temperature limitations do not exist, as they do with every material, but I will state that no such limitation has ever been stated by Magpul or by any legitimate third party.

Please clarify for me - I think you are misinformed.

Steel feedlips come with their own unique set of problems. There is good reason we have chosen not to use steel in our molds, and it isn’t for reasons of cost or complexity…