http://www.botachtactical.com/amdead3.html
Has anyone had experience with this mount. If so please let me know. Thank you!
Buy with confidence. ADM makes a very good mount.
I own quite a few ADM mounts…with one in the mail as we speak, all are perfect as far as finish, fit and function(returning to zero).
You should prob. tell us what you will be mounting inside it and what type of rear buis you are running…that way you can end up with the right scope relief(3 diff. lengths)
Basically I’m looking to put a accupoint tr24 in it. I have the magpul BUS. I am looking to go inexpensive as I can and still have quick release. My upper is a YHM upper with a standard pacatinny rail. let me know if there is any other information that might help!
Imho, you really need the recon or scout x mount when running the tr-21/24 accupoints…i have a tr21 in a recon x mount and it is a perfect match. Since accupoints have BAC, you do not have to worry about getting it as far back as a normal scope but unless you are running a mono rail the non ext. versions will not allow you to clear a buis and fit on the upper receiver.
Keep in mind the mount you have linked is essential like using rings…since it is not extended at all. The big benefit besides QD and return to zero is the ability to stay on the org. upper receiver by using an angled mount.
Here is an ole pic of the setup similar to what you are thinking about…using the recon x and tr21.
I completely understand. Thank you for the information!
One more question I had. Does anyone have any experience with the single quick release scout or is it not as stable as the 2? for example
http://cgi.ebay.com/AMERICAN-DEFENSE-AD-SCOUT-1-SCOPE-MOUNT-1-SINGL-QR-NEW-/230435557771?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item35a707918b#ht_1819wt_911
Did you check your Private Messages?
Also curious about this.
And what does BAC stand for? Thanks. ETA; Bindon Aiming Concept - got it.
i was told that adm mounts were a little on the light side for mounting heavy optics on larger calibers. it didn’t sound right to me. can any one comment on this? for reference…i wanted an adm mount to mount a heavy 34mm premier heritage on an m14. to you think the adm mount could handle this task?
You were fed a line.
The ADM mounts are some of the best on the market.
They grab more rail surface than LaRue mounts.
ADM makes a sturdy mount with a great quick release lever.
I use several ADM mounts including a Recon with 30mm rings and I’m completely happy with them. My choice over most others, although I wouldn’t mind trying a Bobro someday.
FYI, the store you posted a link to while often the lowest price tends to do a lot of backorders. If you want something reliably shipped quickly I would check G&R Tactical, BCM, and DSG Arms to see if they have the same item in stock (with BCM getting the prize for fastest shipping in nearly all cases).
i had a feeling i was being fed a line. it alsost made sense to me seen how the adm mounts seem have metal taken out on the sides ( weight savings?) compared to my other options they did look a little “light” . i also dont like how the vertical rings are not one with the base. they are screwed together…more stuff to come loose and fail. but i cant ignore that every one that i have asked about adm mounts seems to be in love with them. that says something…now matter how “light” they might appear.
The vertically split ring design is very similar to what Larue uses, and Larue is one of the other most highly regarded mounts.
The chunkiest scope mounts I own are the RRA and Burris PEPR. All the extra material for those simply reflects less machining work for lower cost. I doubt they are any stronger than the ADM.
I own 2 and think they are great
I have been using the ADM mounts for several years
they work
The ADM mounts are the bomb. The only issues I’ve had is the lever tension seems to break in and you have to tighten them after the first month or so.
But… Friends don’t let friends buy anything from Botech tactical. They suck. Buy from Brownell’s or MidwayUSA. MidwayUSA stocks them and ships fast with coupon codes available. Brownell’s drop ships them from the factory. Brownell’s has the forever return policy.
I have a Recon-H. ADM makes excellent mounts. On the other hand I have heard enough negative things about Botach over the years that I would find another vendor.
I just ordered a AD-recon-X (my second AD mount). BCM just shipped it out with my new BCM upper.