So I have a middy 14.5 inch upper on a rifle length buffer/A2 stock. A year ago I read that some guys take the buffer apart and add an extra weight and spacer to reduce the recoil impulse, helping make it smoother shooting. I tried it, and maybe 1000 rounds later it shoots great. Never malfunctions, shoots very smooth. Did it out of curiosity, and since it works fine, I never changed it back. Now I’m intersted in a springco green spring and I’m wondering if I might have problems due to the stronger spring and extra weight in the buffer. Long shot, but has anybody tried this?
Sol1777
Try it and see
After reading the bolded bit, I have to ask why?
Why change the spring? I’ve shot more than a thousand on the current spring, not sure how many rounds. I was reading another post that mentioned springco springs and got me thinking I’ve never tried one. Heard nothing but good things about them. Small cost for some longer lasting durability.
Maybe some short-stroking, but not a catastrophic malfunction.
For the price of entry, it’s worth a shot.
If you’re looking into replacing the standard rifle recoil spring anyway, because of use, then sure, as above, why not give it a shot.
I’m kinda shaking my head here. Isn’t this basically just an A5 length system, with a heavier buffer and now a Springco Green spring? I have that set up on a 14.5 BCM middy and the thing runs just fine. Zero issues ever… Get it to the range and function test it with the weakest ammo you shoot.
I’ll have to figure out the weight of my buffer and compare it to the A5. I guess I kinda did do the same thing without realizing it. M855 is the most common ammo I shoot. Haven’t had any issues with my reloads either.
If the buffer is massed properly to the port and the rest of the combination, the rifle like/ A5 action system would have a broader span of operation than carbine action one.
If you replace the aluminum spacer with 2 steel weights, the total goes up to around 6.15oz, very close to an A5H3.
Throw in an extra rubber disk behind the stack to take up all the available space and we call it the R7 buffer.
Yeah, that’s what I have done. The springs on the way, so I’ll test it soon. From what I can tell, should shoot the same as it is, just with a longer lasting spring. I’ll post after some time at the range.