Looking for a good set-up to reload 223. Not top dollar but good quality
Dillon 550. If you want top dollar Dillon 1050.
And from the “red team” Ive loaded thousands of rounds on my Lee Turret press, which by the way, owes me nothing compared to the cost of buying factory ammo. Seems like Chevy vs. Ford, Dillon, RCBS, Hornady etc each have developed a following. For my simple, 500 rounds a month, the Lee has performed outstanding at a price point I could justify easily.
NOW IF I COULD ONLY FIND PRIMERS AND BRASS… OH YES, BULLETS TOO, AS IN .224 VARIETY:mad:
I concur
Hornady Lock n Load if you’re doing one caliber.
Loading rifle cases will still require prior prepping but once you get it dialed in you can really crank them out.
Sent from my SCH-I535 using Tapatalk 2
Lee presses like the guy above is talking about are ok for one caliber. It definitely is not a chevy ford type debate. There is a definite difference in quality. You can load great ammo with lee products. They just are not high quality, and require tinkering to keep them running properly.
The hornady press works but it has problems. It is not designed as well as the Dillon presses. You will find that the AP is more prone to having problems than the Dillon.
If you are going to buy a turret just get a 550. You can use it as a turret if you want or as a progressive. For the money the 550 can not be beat.
If your going to spend the money for a lnl ap or 650 why not just step up to a 1050. Especially if you are going to only do one caliber. If the caliber is 223/556 the 1050 swages the primer pockets. For a progressive it is solid top to bottom.
Presses are like firearms it is the Indian not the arrow, but a quality press is like a quality firearm. If you are having problems it is less likely to be the press.
The Dillon 550 will do anything you need it to do.
Thank everyone for the information!
Had to read this twice, lol
Thankyou for the on the fly, in-depth look.
The only other thing is, how many rounds do you go through? If it’s low, I wouldn’t buy a progressive. (By low, I mean a few hundred per month) But if you are cranking out lots, you can’t go against the dillon 550 advice.
I’d recommend the 650 over the 550 for .223. That way you can add the case-feeder. Also very nice if you get the case trimmer. Makes prepping the cases very easy.
+2
But be advised that reloading components are in very short supply right now.
Dillon 550 and if you want, add the case feeder. I had a sweet 550 when they changed from the 450 and then sold it to buy the 650 which I have a problem with from time to time. I wish I had the 550 back.
I agree. The 650 can occasionally be cantankerous (easier to jam) on small bullets (.223/9mm). My 650 was covered to LRP stuff (.45 ACP / .308, etc.) years ago and left that way. I load .223 on a 1050 that was a gift. 
(Both of my Dillons are ~20 years old, if that matters.)
The 550 does not have the moving parts that can sometimes cause grief with the 650.
Whichever way you go, Dillon is excellent in the No BS Warranty department. I’ve had a few occasions to use it on the 650; never needed it yet on the 1050.
This post below expresses my own opinion on the subject. I’ve owned Lee and Dillon. It’s more like a Mercedes vs VW comparison. Got the Lee Prog 1000 first almost 30 years ago due to the cost ($99 back then) saved and got the Dillon later. Knowing what I do now, I wish I had just bought the Dillon first. However, that said, the Lee has produced both 10mm and 9mm in the thousands and definitely got my $ worth.
He wants to load 223 yes it can be done on the 650, but the 550 is much better for rifle. The 650 was designed with high volume pistol shooters in mind. The 650 has more flex at the shell plate than the 550. If wanting a solid top to bottom auto advance for rifle the 1050 is the way to go.
OK one caliber. But how much ammo do you plan on loading in a month? Any reloading machine is capable of loading one caliber just fine. But they all have limits on how much they can do in a limited amount of time. 223 also takes a longer because of the case prep.
A lee classic turret is going to load about 200 rounds an hour after prep.
A Dillon 550 is going to load about 450 rounds an hour after prep.
A Dillon 650 is going to load about 900 rounds an hour after prep.
But twice as fast cost as much. For 80 percent or more of reloaders a Dillon 550 is all the press you will ever need.
Available time is a factor, too. I had a lee 1000 progressive in high school that helped me feed my USPSA habit. Worked very well, but it was akin to the shovelhead HD I had for a while…lots of fixing/adjusting/tweaking for the amount of operating time. I still load .50 on a lee classic, though.
I stepped into a Dillon 550, which is a great press, but I now wish I had gone 650, especially for rifle. I can do over 500 9mm an hour if I start with filled primer tubes, but rifle is slower.
Just don’t plan on using mil brass unless you buy it with the pockets swaged already or you go 1050. Nothing says “suck” like high volume pocket swaging, except maybe trimming .50 BMG brass by hand.
The Super Swage 600 can knock a bunch out pretty quickly. It’s the trimming that kills me. I think a Giraud is in my future.
Embrace the “suck”.