Forgive if they seem random but they are somewhat specific.
HK91:
For a factory 91 who does a professional, high quality paddle install? So much that it would be indistinguishable (legally) from factory G3? My 91 is at 95% and does okay but I feel that a paddle would make life easier. If no such surgery exists without substantially devaluing the rifle (which I wont sell anyway), I wont do it.
-175 gr SMK through a 91 barrel. Compatible? Not looking for PSG 1 results here, I just have some old Hornady TAP that I want to dispose of the fun way.
-Does HK USA make a 20" barrel conversion for the MR762?
Mike is one of the top guys still doing HK work. Mike and Tammy are superb people as well.
The 91 is a 1:12" twist rate gun; mine ran M118LR just fine when I had it.
At current, the MR308 (the non-US rifle oddly enough) does have a 20" variant option, but there is no 20" MR762 factory option. There are a couple of 20" 417 barrels floating around but they have changed hands for somewhere above $3k. Best bet is to roll with the factory 16", and harvest the barrel extension/gas block at your leisure and have someone proper spin up a 20" off of a Bartlein (or whatever) blank.
Thanks for the speedy replies bros. Will look into it. I got long fingers but not that long for the 91 mag release. Well def look into TSC.
I know the MR762 Q was a bit of a stretch and I know what a good 16" bbl can do, but I wouldn’t mind another crows nest deal.
The HK has enough heft that an SBR would make more sense than a SCAR SBR but if I were gonna change a barrel, I just like how a 20" would be. I wish HK offered tge option. But have read the shorty HK has essential AK accuracy.
If any HK USA people are lurking a 762 separate upper would rule for guys wanting to SBR stuff or get a mite more velocity out of the rifle.
16" is great and all but for its weight with long rail, it just screams benchrest w/ 20".
In a couple more weeks I cam shoot again and all my safe queens and wild stuff is going with me. And some Vietcong Hoodrat Communazi IPSC targets gonna die
HK makes MR762 only in 16,5" but MR308 (EU/Canada model) both in 16.5" and 20". Comparing range reports there is no significant (if any) real advantages of 20" over 16.5" version. Unless you really need a bit more of energy on target on really long range. Germans went with 16,5" with their G28 DMR (Italians are more hardcore with 12" HK417 Assaulter version used as DMR).
Negative, the short-barreled HK’s are plenty accurate…at least the G3k’s I’ve seen/had were. I believe what you are referring to is that out of a short barrel the muzzle velocity for a 308 is similar to that of a 7.62x39…+/-2300fps or so. While that’s true, we’re talking 123gr vs a heavier 168 or 175 SMK which at the same velocity has a higher BC and more weight and still more energy. The weight penalty and velocity/energy loss may not be ideal, you have to remember the purpose for such a tool. In the case of delivering an accurate, short-range shot is still about as effective as being on the receiving end of the same round 400-500y downrange from a 20-something inch barrel…still a fair amount of energy to achieve results.
I have had T. Mark Graham at Arizona Response Systems install paddle magazine releases in two of my H&K’s. I have been extremely pleased with the work.
Mark does good work as well as Jason at I.G.F. Some of these guys are pretty backlogged though. I dont think a paddle install will devalue your rifle, quite the opposite. It wont ever be “indistinguishable” from a factory G3 as they have pushpin lowers. The paddle is pretty handy though.
Well…I dunno if I want it to be a total G3 clone. It was, at one time, a police countersniper rifle made sometime in the mid to late 80s. It came with everything minus S&B scope. It was configured to be like an SG-1 minus set trigger and full auto. I got an obscene deal. Time and place. It was replaced years back in favor of a pistol grip stock M1A of all things. I am assuming it is because this was post legacy pre HK41x and no supply train. Or some Lieutenant just thought M1A is better (A lot of emotion goes into police weapons procurement)
I wish it had the S&B though I got the mount. It is in like new shape aside from handling marks, a near decade of me shooting it off and on, and a dept (no agency I was affiliated with) engraving.
I just thought a paddle mag would be easier. I don’t know if I want to invest in a PTR 91. As I have been reminded and accept, I have more accurate semi autos and the HK DMR is a shoehorn idea.
I’m kinda used to the factory trigger after so long but Geisseles have spoilt me.
I may just do the paddle mag and keep lower as-is. The engraving gives it character. Plus, even with M80, I can still ring steel iron sighted at 350 so…meh. It is fine as is. But I just think a paddle would make it more ergonomic.
Longterm dreaming, but I may get an S&B Exos instead of a Zenith. But that is way, way longterm.
Yeah, I’d put the money towards optics rather than changed markings and grenade launching rings. It’s one thing to build a G3 semi from a G3 kit, not sure I’d remark a factory HK 90 series. The paddle mag is a practical change that actually has a function.
If the S&B scope proves too elusive you might try and score an older Zeiss, that would also be correct for your rifle.