Outstanding article! You won’t find this kind of review in any gun rag I’ve ever read.
FWIW, when I decided to go back to carrying a 1911 on patrol, I started with a TRP (which is a lot of gun for the money, but not a Pro). I installed a 10-8 slidestop when it was new and it never found a mag it didn’t like after that. I now carry a NHC 10-8 pistol (as I still don’t have the patience to wait a year for a good duty pistol).
I also carried the AE Nelson quad mag pouch for awhile, but I recently replaced it with a Safariland 277 quad pouch. It fits flatter (probably not much more than a Glock 21 pouch) so I think I’ll stay with it.
The 1911 may be a little heavy, but it sure feels good in these old hands when I pull it.
the way it was explained to me steve went thru the guns and replaced things like extractos,sears, firing pins with wilson bullet proof series and he also went thru the magazine tweeked them alittle and replaced the springs with wolfe extra power springs.
From what Mr Dave Williams (Springfield Custom Shop) told me…Swat and HRT both fall under a group within the FBI that designed and made the requirements for the pistol. And that Swat was the first to field test the pistol.
When the SWAT gun (Springfield Professional) was being tested & procured, HRT was still using its Les Baers … or trying to, at least. It was only later that HRT decided to adopt the SWAT gun with some modifications.
Excellent write up. Just one small correction though. Believe it or not, the slide stops are not forged. They’re MIM. In fact, the following parts on the Pro are MIM: slide stop, mag catch, firing pin stop and disconnector. This is per Deb from the Springfield Custom Shop. Now that may have changed, but that’s what it was a few years ago.
I have to admit that it bothered me to know this but the fact is, quality MIM parts can be very strong and more than adequate for certain applications. You just don’t hear of these parts breaking on the Pro.
The beavertail is also a MIM part according to a recent email from Deb at the Custom shop. The 20 LPI front strap is also hand checkered on the Professional unlike the machine checkering done on the TRP.
I have talked to Dave Williams about the MIM concern. It is all in the quality of the MIM part. Kimber used some cheap MIM stuff for a while giving it a bad name. Per Dave, Springfield has had less failures with their MIM parts than with other manufactors (forged) parts that they had been purchasing and using in their guns. Just like everything else it depends on who makes it for you and how much you want to spend on the MIM part. Their are crappy forged parts out there also. Remember the Pro is basically a Custom Carry spec,ed like the Swat,HRT wanted them. A whole lot of Custom Carrys have been shot alot with no problems with the MIM parts. I would put my two Pros up against a Baer or Wilson with no worry. I do not feel creeped by MIM anymore
I had a Pro for a while and loved it for the most part. My only issues were with the sights and the barrel bushing. I tried to adjust the rear sight, and it was impossible to move. I think they must put them in with a hydraulic press. I also prefer the bushings on 1911s to turn by hand rather than require a bushing wrench. But given the FBI accuracy requirements, a super tight bushing is kind of inevitable.
Also, keep in mind that the Springfield Custom Shop is awesome. After my ham fisted efforts at drifting the rear sight (that left it marred) I sent a target I shot along with the gun to Springfield asking them to adjust the sights. A couple of weeks later they returned the gun with new front and rear sights, no cost to me (expect shipping one way). The gun shot exactly where I needed it to. Great service.