7mm-08 or 6.5 Creedmoor

I was pretty much all set to place my order for my build in 7mm-08 and then within the last couple of weeks everyone I’ve talked to has asked why 7mm-08 and not 6.5 Creedmoor.

I don’t reload
I have access to the typical stores: Dicks Sporting Goods, Gander Mountain, Cabelas, Bass Pro, etc. and of course on-line
I plan on shooting target and hunting (eventually), I wanted a flat shooting round capable of performing well at all kinds of distances with lower recoil
I would like for my rifle to be used by not only me but my wife and eventually my kids
I grew up using a .270

So, with that, what’s the crowd say?

If sticking with factory loads only…
6.5CM if you want a target gun…and maybe occasionally hunt
7mm08 if you’re going to hunt…and occasionally target shoot

You have been in the other thread, so I know you have heard both sides of this argument.

Most people shoot 2 different kinds of ammo, maybe 3. Being able to choose from 30 different loads is far different than only shooting 2 different rounds. I’m not going to waste more time trying to convince you which is better. I have shot a 243, 6x47, 6.5x47, and 6.5 creedmoor extensively. I shoot steel out to 1251 weekly. The 7-08 will not shoot as well at distance or hold a tighter group. Recoil is about the same on all 3, with the 6x47 being a small bit lighter than the rest.

Ballistically the the 6.5 out performs all the above. There are small differences between them, with the exception of the 08 being a shorter range cartridge. There are quite a few people who have not ever shot a 6.5 of any flavor. These tend to be the 308 crowd…and those that have shot one, will say it shoots better.

It is a fact that the 6.5’s shoot longer, are more accurate, and have less recoil.

Ask your self this…why would I limit myself to a shorter range cartridge(7-08) when I can shoot something that is better (6.5)in every way???

The creed reigns supreme if one of your requirements is shooting box ammo. There is a reason it is so popular. If your hunting not more than 500 yard shots, it still wins. Past 600 is where shooting ability makes or breaks you. If you are getting a custom gun built and decide you do not like the 6.5, just spin up another barrel…or vice versa.

If you lived closer, I would take you out to the range and let you shoot mine out to 1k. In less than 5 rounds you would be sold on the 6.5.

You make a strong case. Thanks. I appreciate it.

What about 7mm mag, or 300 win mag. Both are excellent for shooting any N.American game and also will reach 1000+ with no issues at all with quality factory ammo. I do also own 243, 308, 6.5, etc rifles. A good muzzle brake goes a long way if your worried about recoil… I would pass on a 7-08.

Read the last portion of his post. He wants his kids and wife to have a pleasurable experience when shooting the gun. Both of those guns have higher recoil. I realize you can put a brake on those also, but it takes something like the bastard brake to make them less recoil sensitive. I am a brake lover, but the blast from a good brake wears on you. I have a friend that loves his 7 ultra. I shot it one time and had enough of it. When he shoots, I stop myself until he is done. I stand behind him with double ear plugs and it still rattles my teeth. I am not a snowflake either, I have a 338 LM that I shoot also with a brake on it, but it is no where near the blast of the 7 ultra.

I gather from his previous posts he is new to long range…or at this point it would be his first rifle capable of long range. Neither does he reload yet. I order to get his kids and wife onboard a creed is the best option. Not only from a ballistic stand point, but ease of shooting also. The 6 and 6.5’s are a joy to shoot all day at a range. Add a silencer and they are all like kitty kats.

I almost built a 7-08 myself, but when you look at how short of an effective range it has, I would have been at a big disadvantage when shooting long. I am not in the 308 class crowd. I know they can shoot well, but they are inferior to the 6.5 flavors. You might as well pull the round out of the gun and throw it as far as you can, shooting it is the same thing.

One day the 6.5 will be eclipsed by a new cartridge, just like the venerable 308. BUT today is not that day. I was a RO at Butch’s belly match this year. There was exactly 1 308 gun out of 62 shooters. He finished dead last. Steel was between 301-1251 yards 8-14 mps winds. The guy that won the match hit about 70% out of 200 rounds. The vast majority were around the 30-40% hit ratio.

I shoot competitive in LR. Most are shooting. 6 creedmoor now but the reason I went with 6.5 was because of sub moa ammo off the shelf. However I can’t remember the last time I shot factory stuff. I don’t push my barrels hard 2780 avg fps my load goes transonic at 1400-ish yards shooting Berger 140 hybrids.

Ballistic IMO 6.5 is the way to go. I do love my .308 though

Sent from my iPhone using Tapatalk

As others have stated, 6.5 creedmoor all day, especially if you don’t plan on reloading. The 7mm-08 cm do well with hand loads, but there is very limited factory ammunition available for it.

I got to play with a 260 rem the other day. It’s very similar to the .6.5 creed.

It was fricking amazing. To put it mildly. Granted, hot hand loads. Krieger barrel…but still… Super low recoil too.

It’s going to be my next bolt gun. No doubt. I think a 6.5 in an rpr makes way too much sense.

I wouldn’t waste to much time with some odd ball round. Everyone likes to talk about big guns. Owning and shooting them are an entirely different matter. Way more punishing. Way more expensive. Especially since you don’t reload. 6.5 Creedmoor is cheaper too.

Do it. You won’t be sorry

I know the OP is still new and does not reload…yet. I have not talked about it much, but the creedmoor is one of the best reloading/learning experiences you can have.
Shooting a gun that runs lapua brass is a piece of cake. Other than skimming the necks and a normal trim there is nothing to do for case prep. Hence your not going to learn like you would using hornady brass, which is inconsistent. With a good skill set you can make them shoot just as well a lapua case, but it takes work. This makes us refine our skills, which are proven by SD/ES numbers getting lower.

A 6.5 creed running lapua 243/308 or 308 palma is the cats ass.

cbx, congrats on shooting the 260. Now you know why they are referred to as laser beams. The 47’s are even better.

I had to resist the temptation to pick up a Ruger Precision Rifle in 6.5 Creedmoor last night at the LGS…

Really? Damn… I was just simply in awe. I’ve shot a bunch of 308 out of shorter barrels over the years.

But 260 out of a 26" that was just pure sex in a rifle stock. Made me want to go throw my 16" 308 in the trash.

So tell tell me this. How much different is the 6.5 creed? Everything I can find said about 50 fps? The RPR 6.5 intrigues me because is no gunsmith needed. The 260 gun I shot took 6 months to get done.

I almost have enough saved for my 6.5 gun. The question I’m struggling with is do I go for the 6.5 grendel autoloader first? Or the 6.5 RPR?

They say the difference between the 260 and the 6.5 CM is that the 6.5 is a little shorter case so you can load longer bullets further out in the case and still fit in standard 308AR/Rem 700 short action mags. Same advantages over .308 still apply with both. From what I gather, the ability to have more OAL flexibility really comes into play with optimizing with the distance to the lands of the barrel, and if doing so requires loading longer it’s nice to not have that make your mags feed only one at a time.

You could do a 6.5 Creedmoor or even a .260 in some kind of AR, maybe a LaRue, LMT, JP, or some other. That’s where the debate could be versus the 6.5 in a bolt gun.

6.5 Grendel is nice but that’s a whole different conversation–quite a bit less zip to it, kind of a “I wish I had a .308 in a .223, so here’s what I can do” in the AR15 platform. It does well for what it is but a 6.5 Creedmore it is decidedly not–400-600 yards you’re quite good, but past that you’ll be wishing you had more. Quite honestly the Grendel would have been better off having been made a 6mm rather than 6.5 (higher BC and more speed in same case size) and it would have a lot more to show for itself. There are 6mm iterations of it, .243 LBC and 6mm AR and 6mm AR Turbo, plus the 6mm Hagar and .240 Tomahawk which are the 6.8 SPC necked down to 6mm. Those do more to put themselves in the running with the 6.5/6mm family of the .308 size action–still not all the way there, but closer, and with better barrel life given that they’re burning way less powder.

Yellowfin made a very good comparison to the 260. That is why they say the creed is a 260 done right. Loading longer is an advantage when using mags. The truth for all these guns in 6x47, 6.5x47, 260, 6.5 creed and even the little 6.5 grendel which is a hoot to shoot…is accuracy combined with pleasant recoil. They all out perform the 308 by a wide margin for groups, with the grendel being a hopped up 556 with good accuracy to 500 yards.

So tell tell me this. How much different is the 6.5 creed? Everything I can find said about 50 fps? The RPR 6.5 intrigues me because is no gunsmith needed. The 260 gun I shot took 6 months to get done.

50 fps does not make that much of a difference. If you want speed build a 6x47 and run the high node at ~3180/w 105’s. All of these guns are laser beams…while having small advantages/disadvantages between them. For someone just getting into long range, a first bolt gun, or needs to learn reloading…I suggest the 6.5 creedmoor since it has a longer barrel life. My new 6x47 has 500 rounds thru the barrel in 45 days. I will be looking to rebarrel at 1700 rounds. A 6.5 can go to about 3k rounds.

If you reload, the 260 may be what you want since Lapua makes brass for it, if you do not reload yet it does not hold any advantage over the 6.5x47 or the 6.5 creed. The 6.5x47 Lapua is the hotrod of the 6.5’s. They can quite easily push a 140 or 130 at ~ 2900 fps. The case with its small primer are made to run at high pressures and still have good brass life.

The creed I had would run lapua 308 brass at 2880 on the high node and 2810 on the mid node. If I shot well I could make 1 hole at 100 and about an inch at 500, with 950 being about 6-8 inches on a good day. Hornady brass ran at 2775 with a slightly larger group at 950. The difference is in the brass. Most guys have shot crap brass before they moved over to lapua. This is why you will see guys running their finger over that blue box in the gun store. Its like sex in a box…best brass in the business.

So for the guy looking at a first gun, I have to say they are all good. Barrel life and affordable ammo go to the creed. It does no matter whether you reload or not yet…that can come in time. Whether it’s a savage, RPR, or a custom gun…you can make them all shoot 3 shots that you can cover with a dime shooting hand loads. They should all shoot about 1/2 or better with box ammo.

With the RpR you can spin a new barrel on yourself, but barrels are higher. LRI currently makes very good ones. A 26" will offer more speed than the stock barrel and be more accurate. The RpR is the best bang for the buck going currently for new guys. Even when we take new guys out with their new build to dope their gun out to 950 before shooting the steel have the biggest smiles on their faces. I often laugh when they only bring one box of ammo. Going long is quite fun.

A grendel will be fun for the first few mags, but it will leave you wanting more after a while. Shooting out to 1400 yards is always fun. Some days I can almost clean the range we are on, and then there are those days where I can’t hit that dam 517 yard gong on the hill, but hit everything past it… WTF !!! Gotta love the wind.

Don’t sell yourself short on choosing a caliber. You may meet someone 6 months after getting your gun that will offer to let you shoot on his land. A grendel will not make it out far enough, and a 308 will be lobbing bullets. This really sucks when you cannot see your vapor trail or miss for a correction. The guy next to you with his 6.5 will be ringing steel, while you get frustrated at all your misses.

cbx, get the 6.5 RpR and don’t look back. It shoots the same as the 260. Do not forget you can rebarrel to a different caliber also. If this is your first foray into long range…your going to wear out the barrel just learning how to shoot well.

:slight_smile: yep

Thanks for the info guys. Much appreciated.

Picked up a Tikka T3x CTR 6.5 Creedmoor from a member selling his “impulse buy” couldn’t turn it down. Can’t wait for it to get here so I can start breaking it in.