How to SBR Your Lower by Scottryan

[Renegade]

Considering a stripped lower is $150+/-, and engraving is $50+/-, and the SBR tax is $200, you're looking at a stripped lower that you have put $400 into+/- (not to mention shipping to and from the engraver), and that you will be lucky to get $100 for on the used market. And even then you'll have your name and location from the engraving out there floating around for whoever winds up with the lower.

I'd guesstimate $450 invested in the lower and $75 resale value.

Buy a factory SBR and solve the problem. For example, and LE6921 runs around the same price as a LE6920.

[markm]

Buy a factory SBR and solve the problem. For example, and LE6921 runs around the same price as a LE6920.

Where? I'd like to get an LE6921, but they're $1695 at SAW.

[Tom_Jones]

deleted

[markm]

While not quite the same price as a 6920, Knesek Guns lists the 6921 for $1442.

That's much better. If they have them, it would save me more than the cost of the NFA stamp.

[SuicideHz]

I bought a Noveske and luckily was able to skip most.

Unfortunately I did have Orion Arms do the engraving and I'm not too happy. He slopped black paint in the engraved area and smeared it around with a paper towel of some sort. There was a little dried lint I had to remove.



Your post seems to have a lot of sass to it. Same thing I'd expect to see when 20 people complain about their Aimpoint clones breaking. I like it. Pretty funny.

[scottryan]

Buy a factory SBR and solve the problem. For example, and LE6921 runs around the same price as a LE6920.

This is true but most want to build their own from scratch.

[rob_s]

Buy a factory SBR and solve the problem. For example, and LE6921 runs around the same price as a LE6920.

Just noticed this, and I agree completely. All of my SBRs are factory and not engraved.

[NightFighter]

Buy a factory SBR and solve the problem. For example, and LE6921 runs around the same price as a LE6920.

How does buying a Factory SBR solve the paper work problem?

[Renegade]

How does buying a Factory SBR solve the paper work problem?

RIF.

The problems to be solved was the engraving:

"And even then you'll have your name and location from the engraving out there floating around for whoever winds up with the lower."

[opticalc]

Buy a factory SBR and solve the problem. For example, and LE6921 runs around the same price as a LE6920.

I went the 6921 route, got a great deal from Code4 LLC. I liked not having to have any additional engraving. Plus the 6921 actually is marked as a Colt M4 on the lower receiver. Actually, its marked "M4LE" but still...