The Offical SBR Picture Thread - Page 62

FNCFAN · #**1221** 11-16-2009, 02:29 PM

I also have an LMT 10.5" on my FA Colt, but this could also wear a 14.5" Bushy, a 10.5" RR 9mm as well as the current dedicated .22 setup. No need for a FF rail on this heavy bbl .22. May put a FSB side sling unit on or go with a single point rear rec plate and a set of KNS pins. Cheap sights, but, it's a .22. Too many other flattops to dress up.

decodeddiesel · #**1222** 11-16-2009, 02:47 PM

Quote:

Originally Posted by FNCFAN

I also have an LMT 10.5" on my FA Colt, but this could also wear a 14.5" Bushy, a 10.5" RR 9mm as well as the current dedicated .22 setup. No need for a FF rail on this heavy bbl .22. May put a FSB side sling unit on or go with a single point rear rec plate and a set of KNS pins. Cheap sights, but, it's a .22. Too many other flattops to dress up.

How do you even see out of the optic with it mounted so low?

DavCoff · #**1223** 11-17-2009, 10:51 PM

Quote:

Originally Posted by hal_5555

my humble addition...

Very sweet!

DavCoff · #**1224** 11-17-2009, 10:55 PM

Quote:

Originally Posted by decodeddiesel

Nice MK18 Clone! I dig em too.

bwhited · #**1225** 11-18-2009, 03:26 PM

My new Colt 6450 / RO635 SBR. All Colt, except for magpul trigger guard & CTR stock

Pat_D · #**1226** 11-23-2009, 01:05 PM

Both identical in almost every way.

Colt upper and lower receivers
Colt bolts and bolt carrier groups
Colt H2 and H3 buffers
Stock Colt trigger groups
10.5' Noveske N4 barrels
PRI Gasbuster charging handles
Both setup for Surefire suppressor use
Surefire X300's mounted at 12:00
Magpul ASAP's, MS2's, Miads, and triggerguards
Daniels Defense Mk18 rails
Daniels Defense 1.5 rear sights and front sights(not shown)
LMT SOPMOD stocks with Vltor receiver extensions
Tangodown stubby foregrips
Aimpoint T1's in Larue tall mounts

Cameron · #**1227** 11-23-2009, 02:44 PM

RetreatHell · #**1228** 11-23-2009, 02:57 PM

Great looking blasters, brother!

How do you like your SF suppressor on the SBRs? I should be getting my Form 4 back for my surefire 556K can any day now and I can't wait! I'll be running it on a BCM 11.5" and also a BCM 16" middy.

Semper Fi,

Paul

Quote:

Originally Posted by Pat_D

Both identical in almost every way.

Colt upper and lower receivers
Colt bolts and bolt carrier groups
Colt H2 and H3 buffers
Stock Colt trigger groups
10.5' Noveske N4 barrels
PRI Gasbuster charging handles
Both setup for Surefire suppressor use
Surefire X300's mounted at 12:00
Magpul ASAP's, MS2's, Miads, and triggerguards
Daniels Defense Mk18 rails
Daniels Defense 1.5 rear sights and front sights(not shown)
LMT SOPMOD stocks with Vltor receiver extensions
Tangodown stubby foregrips
Aimpoint T1's in Larue tall mounts

Pat_D · #**1229** 11-25-2009, 01:26 PM

Hi Paul,

Thanks for the kind words. The BCM stuff is realy nice too. I'm sure you'll be very happy with those setups. I like my Surefire can quite a bit. Surefire's claim of the gun being more acurate with the can on is absolutely true! Probably cut my groups down by a third or more with the can on. The fast attach feature on the can is great and it is pretty damn quiet. I'm able to shoot without hearing protection easily. The only thing you hear is the sonic crack downrange and the bolt carrier going back and forth. Pretty cool. The other nice thing about my setups is that even with the Suppressor on, the overall length is slightly shorter than my 16 inch gun. You'll like it!

Aggunner · #**1230** 11-27-2009, 01:05 AM

Cameron · #**1231** 11-30-2009, 02:37 PM

LMT 10.5" upper & Defender lower
Daniel Defense 10" Lite rail & Magpul XTM rail panels
Noveske KX3 flash hider
EOTech 552 on Larue riser, Troy BUIS
Magpul UBR stock
Ergo grip

Glock 19

Cameron

SWATcop1911 · #**1232** 12-01-2009, 02:13 AM

Quote:

Originally Posted by Cameron

LMT 10.5" upper & Defender lower
Daniel Defense 10" Lite rail & Magpul XTM rail panels
Noveske KX3 flash hider
EOTech 552 on Larue riser, Troy BUIS
Magpul UBR stock
Ergo grip

Glock 19

Cameron

Cameron, I love the pics of your rifles and pistols, but they need your woman in them to be complete!

CharlieMike · #**1233** 12-02-2009, 11:05 AM

Daniel Defense Upper
- BCM 410SS 11.5" Barrel
- Daniel Defense Low Profile Gas Block
- Magpul front and rear MBUS
- Daniel Defense Lite Rail 10.0
- BCM Gunfighter Charging Handle
- BCM BCG
- KAC Hand Stop
Daniel Defense Lower
- Magpul MOE stock and Grip
- Magpul ASAP plate
- Magpul BAD lever
- KAC Combat Trigger Guard
- Daniel Defense LPK
- KNS anti-walk/anti-rotate pins

I plan on adding an Aimpont T1 with a Daniel Defense mount and possibly a set of Daniel Defense front and rear sights.

I'm waiting for a new buffer from Grant before I shoot it.

(It is covered in cat hair. I'm surprised it doesn't show in the pictures.)

ETA: I realize the sling is on upside down.

adh · #**1234** 12-02-2009, 11:34 AM

Quote:

Originally Posted by CharlieMike

Daniel Defense Upper
- BCM 410SS 11.5" Barrel
- Daniel Defense Low Profile Gas Block
- Magpul front and rear MBUS
- Daniel Defense Lite Rail 10.0
- KAC Hand Stop
Daniel Defense Lower
- Magpul MOE stock and Grip
- Magpul ASAP plate
- Magpul BAD lever
- KAC Combat Trigger Guard
- Daniel Defense LPK
- KNS anti-walk/anti-rotate pins

I plan on adding an Aimpont T1 with a Daniel Defense mount and possibly a set of Daniel Defense front and rear sights.

I'm waiting for a new buffer from Grant before I shoot it.

(It is covered in cat hair. I'm surprised it doesn't show in the pictures.)

ETA: I realize the sling is on upside down.

Very nice! I have been contemplating ditching my 9.5FSP lite rail for a 10" and having the FSB shaved on my 11.5" BCM (standard). When rolling support thumb over the top of the rail, that FSB can get hot. I was thinking of going with DD fixed sights as well. I already run an Aimpoint H1, but have a TD stubby grip, and Surefire G2 in a Vltor mount (BTW, you need to add a light

)

CharlieMike · #**1235** 12-02-2009, 11:50 AM

Quote:

Originally Posted by adh

Very nice! I have been contemplating ditching my 9.5FSP lite rail for a 10" and having the FSB shaved on my 11.5" BCM (standard). When rolling support thumb over the top of the rail, that FSB can get hot. I was thinking of going with DD fixed sights as well. I already run an Aimpoint H1, but have a TD stubby grip, and Surefire G2 in a Vltor mount (BTW, you need to add a light

)

Ya -- my x300 doesn't fit which is one of the reasons I'd like to get a DD front sight. It might give me enough room to mount it at 12 o'clock.

SuicideHz · #**1236** 12-02-2009, 03:20 PM

Quote:

Originally Posted by decodeddiesel

Good to see you around Joe, the MK18 rail looks great!

Thanks Wes! I'm very jealous of your Mod0 actually!!

SuicideHz · #**1237** 12-02-2009, 03:27 PM

Quote:

Originally Posted by adh

That Vltor upper looks very cool too. What are the specs on that? Barrel looks to be less than 16"

That's an upper I built last year around this time. I used my old Vltor upper, Young NM chrome BCG, my Vltor GB front sight and a 14.5" SS Shilen barrel from Rainier. That's a DD Lite 10.0 and there's a PWS bi lock mount on the end of the shilen.

With my G5 mounted (the actual one steve torture tested) attached I shoot this better than that 16" stealth sitting there.

It's a great upper. I sold it to old pops before I ever shot it. I regret that but oh well!

Sorry- it's a 9.0 on a midlength 14.5".

edwin907 · #**1238** 12-03-2009, 07:15 PM

A 10.5" LMT upper with KAC RAS II.

DavePAL84 · #**1239** 12-03-2009, 08:55 PM

BCM 11.5" /w DD lite 7" rail

Coltdogg · #**1240** 12-04-2009, 12:58 AM

Just want to say Hello, here is my first post and I thought I would start with a few pic. of my Colt LE6933, MP5 and a few others!!

I thought I was the only one to put a ACOG on a SBR, That is tell I Started looking on this page!!!