I guess my Google-Fu failed completely.
Dr. Carter G. Woodson, “History shows that it does not matter who is in power or what revolutionary forces take over the government, those who have not learned to do for themselves and have to depend solely on others never obtain any more rights or privileges in the end than they had in the beginning.”
I've used Badger C1 with that scope and also a Razor 1x6. Yeah gotta use a 1/2 inch wrench but easy peasy and absolute return to zero.
"We all got it comin"....Will Munny
I run B5 stocks on my LPVO guns.
https://b5systems.com/m-4-multitasker-tool/
I'd give a hard look at Primary Arms 30mm PLx Cantilever Mount - 1.5"
https://www.primaryarms.com/primary-...-plx-cm-30-1.5
Best part is you don't need to carry a 1/2" wrench around with you, as the PLX takes a T25 Torx. The Badger Condition One, Geissele both need a 1/2" wrench. The Reptilia AUS mount also takes a T25.
Something like a TORX SHORT ARM L-KEY T25 for under $3.00 is easy to carry and store.
https://www.wihatools.com/products/t...key-t25-x-63mm
Also, should you ever want to you can get a Primary Arms PLx Top-Cap Reflex Mount - 30mm for a mounting a small Red Dot at 12 o'clock.
https://www.primaryarms.com/primary-...t=%2Fpurchases
I have that set up with a Trijicon 2-10x36mm in a PLx 20 MOA 30mm mount, with a Holosun HE407C-GR-X2 in a PLx Top-Cap Reflex Mount. I had to use a 10mm spacer from Reptillia ROF™-RISERS FOR TRIJICON® RMR SRO due to the high turrets. The 407C has the same footprint as the Trijicon RMR.
Last edited by BobinNC; 02-06-24 at 21:51.
Neat tool, I keep a small Snap On box wrench handy but rarely remove my optics. My Geissele red dot mounts have the same size lug nuts as the Badger. I switched out the GDI qd mounts for the Geisseles. Little springs and levers vs lug nuts, I wasn't using the qd feature anyway.
"We all got it comin"....Will Munny
Bookmarks