Quote Originally Posted by gotm4 View Post
Here's what I have so far. I just don't have enough time in the day to take pics of everything on the scale.

Colt CAR stock body (plastic) 4.4oz
VLTOR E-Mod stock 13.6oz
LMT SOPMOD stock body 11.3oz
Magpul CTR stock body 8.9oz
Magpul UBR body 1lb 7.3oz
Magpul PRS body 1lb 10.9oz
Rifle receiver extension 3.4oz
Magpul UBR aka ‘entry length’ receiver extension 2.7oz
Unknown mil-spec carbine receiver extension 3.8oz
VLTOR mil-spec receiver extension 3.7oz
BCM castle nut and end plate 1.2oz
Daniel Defense QD end plate (w/o QD loop) 0.4oz

Commercial A2 pistol grip 2.6oz
Magpul MOE pistol grip 2.4oz
Tangodown pistol grip 3.6oz
Hogue pistol grip 2.7oz
Ergo pistol grip 3.2oz

Aluminum OEM triggerguard 0.3oz
Magpul MOE triggerguard 0.2oz
Magpul enhanced triggerguard 0.5oz

Norgon ambi-catch (no stock spring or button) 0.5oz
OEM mag catch (no spring or button) 0.4oz
Troy flip up rear sight 1.8oz
Troy fixed rear sight 2.1oz
DD fixed rear sight 1.7oz
DD fixed front sight 1.2oz
Magpul MBUS front sight 1.2oz
LMT MRP fixed front sight 2.2oz

A2 flash hider 2.1oz
A1 flash hider 2.0oz
Surefire Brake (for 556K, 212) 3.8oz
Troy medieval flash hider 3.0oz

Magpul 20 round magazine (w/o dust cover) 3.4oz
Lancer 30 round magazine 4.2oz
Tangodown 30 round magazine 5.3oz

VTAC low profile QD sling mount 0.8oz
VTAC LUSA sling mount 0.9oz
BCM standard CH 1.2oz
BCM bolt 1.6oz
BCM cam pin 0.3oz
BCM carrier key and screws 0.9oz
BCM Forward assist and spring 0.9oz

A2 delta ring assy 2.7oz
Snap ring 0.2oz
Weld spring 0.3oz.
Delta ring A2 0.9oz
Barrel nut (stock) 1.3oz

A1 handguard ring (ring only) 0.4oz
CAR/M4 handguard cap 0.4oz
Arrendondo mag catch (plastic button, 2 screws and button extension) 0.2oz
OEM mag catch button 0.1oz
Magpul AFG with screw and flat insert 3.0oz
VTAC light mount 1.8oz
Dust door assy, spring, rod and c-clip 0.8oz
BCM firing pin 0.3oz
Magpul ASAP 1.4oz
Gear Sector end plate 0.7oz
BCM long A2 flash hider 2.3oz
RRA 2 stage trigger with springs and pins 2.5oz
Geissele SSA trigger with springs and pins 2.3oz
OEM fire control (hammer, trigger, disconnector, pins and springs) 2.5oz
AAC M4-2000 51 tooth brake 3.7oz
Magpul enhanced (long) stock pad (w/o screws) 2.1oz

Troy 9” TRX rail with bbl nut and two mounting screws 8.7oz
VTAC/Troy TRX 9” rail with bbl nut and two mounting screws 9.8oz
VTAC/Troy TRX 11” rail with bbl nut and two mounting screws 11.4oz
VTAC/Troy TRX 13” rail with bbl nut and two mounting screws 12.6oz

DD 12” RIS II rail with all mounting screws, bbl nut, 6 screws and flange 1lb 2.2oz
DD 12” RIS II FSB model with all mounting screws, bbl nut, 6 screws and flange 1lb 12oz
DD 9.5” RIS II Mk18 rail with all mounting screws, bbl nut, 6 screws and flange 14.3oz

DD 10” Lite rail with all mounting screws, bbl nut, 6 screws and flange 13.0oz
DD 9” Lite rail with all mounting screws, bbl nut, 6 screws and flange 12.2oz

DD 12” Omega with all mounting hardware 13.6oz
DD 9” Omega with all mounting hardware 9.9oz
DD 7” Omega with all mounting hardware 7.8oz
DD 7” Omega piston rail with all mounting hardware 8.4oz

YHM 12” diamond rail barrel nut, slip ring and 2 anti-rotational screws 1lb 4.3oz
YHM Spectre length diamond rail with barrel nut, slip ring and 2 anti-rotational screws 1lb 0.5oz
Tryin' to make me get off my ass and find that chart, aren't you.

I know I have it, it's just a matter of which of three external hard drives (none of which are currently connected to anything) that I have to go through.