Centurion Arms Hammer forged Light weight Barrel

[SMGLee]

Both in 16.1 mid length and 12.5 carbine length.




Slightly tappered front section and Gov't profile under the handgaurd.


Dimpled gas block screw tab

[eternal24k]

WOW,
very nice, I am waiting on a CMMG, and am excited for a BCM, and this is just great! Glad to see more LW barrels on the market, do we have a price or place to buy these? I have a feeling that it is easier to get a Centurion from retailers than direct, or atleast it is damn hard to get a MK12 from them.

[grinch]

Thing should be alot easier soon we are finally getting a new website and we are cathcing up on the MK12's should have them all out soon and the next batch after that hope to keep some on the shelves.

The barrels above are 325.00 plus 12.00 shipping

Specs

-16inch mid length, light weight.
-cold hammer forged
-M4 extended feed ramp
-1:7 right hand twist with 5.56 Chamber
-tapper bore
-HP/MPI tested
-Extra thick Chrome lining
-Mil Spec Phosphate finish
-***Guaranteed capable of 1 MOA or better accuracy with proper ammunition***
-***Service life three times a standard barrel***
-1lb, 9.9oz. stripped / 1lbs, 11.8oz with pinned Centurion Arms gas block

Thanks

[Snake]

when should these be available for sale?

[SeriousStudent]

Wow, this would make a very interesting "recce-ish" build.

Thanks for the heads-up, SMGLee, I have been looking forward to doing a lightweight middy upper.

Thanks for the additional info, Monty, and stay safe!

[Dan Goodwin]

Any chance of a LW 20-in.?

[SPDGG]

when should these be available for sale?

I hope soon

[LonghunterCO]

.75" gas block/FSB journal?

[rob_s]

Two followup questions.

Diameter under handguards? (sorry if I missed it, re-read the thread and didn't see it)
Weight of 16" mid lightweight barrel after chopping and re-threading at 14.5"?

[Col_Crocs]

A follow to Rob's 14.5 question...
Since the first batch of 14.5 middys are to be cut down from 16's, how significant will the loss in tapering be compared to the "factory" 16 or 12 which I assume are rifled with the same preset taper measurement at the end?
Also, I see on another site that CA barrel crowns are both chamfered and recessed with the chrome extending all the way out to the entire recessed surface (this particular feature I really like). How are the 14.5 middys' re-crowning finished? Are they re-chromed to come out just like the factory crowns or just phosphated?