Scope Dope

[B Cart]

B Cart, my thought was try to creatively rerig the Velcro one linked above to run along the top of the stock, using some double-sided velcro as an extender to get it through a waffle or SOPMOD's "right under the tube" slot. Then again I HAVE been known to overengineer things... every house I designed in my architecture classes the interior walls were built like EXTERIORS and connected to reinforced studs spaced every 2', both for extra insulation and so that you could cut new doorways and re-divide rooms without worrying about knocking out a load-bearing wall because EVERY wall was bearing only 3/4 or less the load it was designed for.

haha that may just work. Post a pic if it turns out how you want!

[ST911]

I don't get fancy.

Working/edc guns, I memorize dope to 600 in 100yd increments. Most of the time I can remember the 50 increment. I also write dope in sharpie or paint pen down the side of the gun and/or on the lens cap.

Laminated dope card and maybe a reticle map in notebook to back up the above, and for less frequently used guns.

[Pappabear]

I tape my DOPE to the side of my gun. If you are shooting longer distances, make sure you use the proper elevation. I practice at 1,250 and hunt at 5,000. Doesn't matter much out to 600 yards but beyond it matters.

PB