What?
https://www.admmfg.com/viper-pst-gen-2-pkg
Printable View
I guess my Google-Fu failed completely.
I've used Badger C1 with that scope and also a Razor 1x6. Yeah gotta use a 1/2 inch wrench but easy peasy and absolute return to zero.
I run B5 stocks on my LPVO guns.
https://b5systems.com/m-4-multitasker-tool/
I'd give a hard look at Primary Arms 30mm PLx Cantilever Mount - 1.5"
https://www.primaryarms.com/primary-...-plx-cm-30-1.5
Best part is you don't need to carry a 1/2" wrench around with you, as the PLX takes a T25 Torx. The Badger Condition One, Geissele both need a 1/2" wrench. The Reptilia AUS mount also takes a T25.
Something like a TORX SHORT ARM L-KEY T25 for under $3.00 is easy to carry and store.
https://www.wihatools.com/products/t...key-t25-x-63mm
Also, should you ever want to you can get a Primary Arms PLx Top-Cap Reflex Mount - 30mm for a mounting a small Red Dot at 12 o'clock.
https://www.primaryarms.com/primary-...t=%2Fpurchases
I have that set up with a Trijicon 2-10x36mm in a PLx 20 MOA 30mm mount, with a Holosun HE407C-GR-X2 in a PLx Top-Cap Reflex Mount. I had to use a 10mm spacer from Reptillia ROF™-RISERS FOR TRIJICON® RMR SRO due to the high turrets. The 407C has the same footprint as the Trijicon RMR.
Neat tool, I keep a small Snap On box wrench handy but rarely remove my optics. My Geissele red dot mounts have the same size lug nuts as the Badger. I switched out the GDI qd mounts for the Geisseles. Little springs and levers vs lug nuts, I wasn't using the qd feature anyway.