Bruno's (local dealer) had it in a recent shipment, but we went 20 lbs in on H322. I have more data on H322.
Printable View
I have 10-15k of the #41s so, I will be interested to see what you get.
I have both, too, so I'm curious to see what comes of this...
Based on this, I'll consign the not-so-good-ones to blasting ammo and the good ones to precision ammo.
This would strictly be matched to the loading methods and components I'm going to run... especially the powder. Wolf should be the more accurate primer, but I wouldn't pass on a nice stash of 10k of the CCI 41s for loading ammo either.
Annealment complete. On to sizing.
https://i.imgur.com/4jNCuKi.jpg
Looking forward to the results!
I had the opportunity to shoot over a labradar last year on a cool morning. Load was 23.2 8208- trickled and weighed, Lapua once fired brass, 77 TMK, and Federal 205 primers. Brass was sized with a Mighty Armory mandrel sizing die. Rifle was a trued up Rem 700 with an 18" Bartlein.
Two shots to warm up the barrel and then five for the record. 2720 FPS with an SD of 9.
I very rarely anneal 556 brass. But after FL sizing, I can feel a smoother pull on the press with the neck expander die. Not sure if it's the annealing or the Lapua brass. Just a smoother even pull.
https://i.imgur.com/iqhNckf.jpg
I know. This thing is slow. I'm just used to the suffering.